Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.

To visit the HydrostreamForums Knowledge Base CLICK HERE

wiring help

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek: :up: :boating: :pound:
View more smilies

BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON

Topic review
   

If you wish to attach one or more files enter the details below.

Maximum filesize per attachment: 5 MiB.

Expand view Topic review: wiring help

Re: wiring help

by YDOC462 » Jul 16, 2012 1:30 pm

Got it figured out today. I had it right. Kill switch grounded seperate. The missing link was a black with green stripe wire coming from the key swtch. I jumped it in front of the kill swtch. My guess is when the key is turned to off position, a ground circuit is closed through the key out the black and green wire. Everything works as intended now and I can save the integrity of the kill switch.

Thanks for the help guys

[ Post made via Android ] Image

Re: wiring help

by idvette » Jul 06, 2012 6:38 am

Having the 2 grounds parallel is what you would need. Ground your ignition switch, then splice the kill switch into the ignition wire (the one that when grounded kills the motor) before the switch (assuming kill switch is normally open) that will give you 2 grounds on the circuit. The reason it doesn't work now is because you're in series, and with the kill switch normally open the key switch doesn't actually have a ground.

[ Post made via BlackBerry ] Image

Re: wiring help

by YDOC462 » Jul 05, 2012 3:07 pm

Any remedy or just use kill switch?

[ Post made via Android ] Image

Re: wiring help

by alaskastreamin » Jul 05, 2012 2:55 pm

The factory switch grounds the "kill" circuit when it's off. This feature won't be on an aftermarket "universal" switch.

Re: wiring help

by YDOC462 » Jul 05, 2012 11:43 am

Yeah gauges power down, wired them on the purple wire.

Theres a constant 12v (red) that I wired directly to red on harness.

I feel like it's something to do with how I have the ground but I can't put my finger on it.

[ Post made via Android ] Image

Re: wiring help

by Surface Scratcher » Jul 05, 2012 11:33 am

Do the gauges power down when you turn the key off?
If they do, that's the same terminal that should power the ignition, assuming you have the 'hot wire' going into the proper terminal.

I'm sorry, I don't know what color wires go where. I would use an ohm meter to locate the proper terminal.

Re: wiring help

by YDOC462 » Jul 05, 2012 2:17 am

When running and pull the kill switch it kills.

[ Post made via Android ] Image

Re: wiring help

by Surface Scratcher » Jul 05, 2012 12:04 am

What happens when you are running and you trip the kill switch? If the motor keeps running, I would say that you have somehow wired it 'parallel' instead of in 'series'. Best of luck. :)

wiring help

by YDOC462 » Jul 04, 2012 6:30 pm

thought id run this by the forum before i started to try and figure this out on my own. might save me some time..

i wired the boat with a merc harness and a new sierra ignition switch. the ignigition switch has 6 wires. im also using a sierra kill switch. everything works fine but when i turn the key off to kill motor the motor keeps running. the kill switch will kill it. all gauges working properly ( power up when key is turned to "on" position)

i wired everything straight up color for color. the kill wire (black/yellow) is wired "in"kill switch "out" to seperate ground.

seems the motor isnt geting kill signal to stop when key is turned off?????

is it a problem with how i have the (-)grounds wired???

black (-) ground coming out of key is wired directly to harness (-) ground

any help appreciated :up: :up:

Top