Hi all, just bought my first hydrostream Voyager. Looking for a windshield, year is 1982. Any leads on where to find one would be great. Thanks in advance.

[size=85][b][i][ Post made via Android ][/i][/b][/size] [img]https://www.hydrostreamforums.com/ext/sniper/mobiledevice/images/Android.png[/img]

Thanks for the info, was considering raising the motor

[size=85][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/ext/sniper/mobiledevice/images/iPhone.png[/img]

hits hard out of the hole,on plane like right now.guy I bought the boat off of had a 26p chopper no jack plate was ok but I think I get better performance with this prop.these boats like the prop shaft about 2 1/2 inches below the pad.i had to raise my motor when I got the boat guy had it over 4 inches below the pad world of difference.lot of info on hydrostream.org on set ups on voyager,good luck :mrgreen:

How is it out of the hole with that prop

[size=85][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/ext/sniper/mobiledevice/images/iPhone.png[/img]

83 voyager 200 merc.25p 4 blade trophy 68-69 gps

Just bought a 82 voyager 150 merc mounted direct onto transom at lowest setting, need some advice for props, I have a 17 and 25 pitch laser prop at the moment but would like to find a good all around prop 3-4 or five blade?

[size=85][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/ext/sniper/mobiledevice/images/iPhone.png[/img]

what prop you running with your 225 Ho

Im running a 225 ho etec with no set back and no modds and hitting 76-78 mph 85 Voyager.

Welcome,

For top speed?
Without knowing anything else about your setup, the answer is a lot.
Both the Vpad and XT will take 10 or more, maybe a little less with a heavy motor. :up:

good to see an evinrude comeback!