We have not use any on a tunnel bottom yet. I'm not sure, if or how they would work. I have an XT, but it's in storage, otherwise I'd see how they fit. Generally the XT hull doesn't have the porpoising problems.

Not trying to ask a million questions. But would they be of any use on a xt hull or were they only used on v pad? If they are of value on a xt hull put me down for a set.

[size=75][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/iPhone.png[/img]

Sorry, I forgot about this.

I have two sets of large left. I can trace the cut line so you can trim them to small size, or somewhere in between..

A band saw will do the trick.

I would need the small as they are for a 16 ft Ventura. Thanks anyway

Do you need the large or small? I may only have large left. They can be trimmed to fit your application.

Hey Ronnie do you have any of the trim tabs left.If so I would be interested in a set. Thanks

3 or 4 sets of each left.

Kevin, let me know if you're coming out.

I really need to get out there and pick mine up. Maybe tomorrow if I can get the bike all buttoned up tonight.

any of these left?

[quote="mitchielpricer"]great got them today started drilling my mounting holes and was impressed with the material used looks like some kinda high grade air craft alum. thanks again mitchiel[/quote]


It's 5052 H32 aluminum. The strongest plate that will still tolerate bending without fracture.

I like to drill then and use a 100° countersink. A # 10 or 12 screw to match the chamfer really holds them for keeps. The factory didn't do this. My originals pulled loose. Not anymore.