i found a v6 trigger laying around shop brand new cdi part # 134-6456-15 need stator number and was a little black box on top took it of as well had 2 red wires 1 black and 1 white maybe yellow wire bolted on top of port side top of heads and can u tell me how to hook up the fuel rail has a inlet on top and bottom doesnt have t in the middle is bottom inlet then top out to fuel pressure regulator?

[size=75][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/iPhone.png[/img]

Tony can clean those injectors. You need a 16 amp stator and a v6 trigger. If you need part #s let me know.

[size=75][b][i][ Post made via Android ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/Android.png[/img]

thought about that cody but these are bosch injectors iam pretty sure out of a mercedies bnz lol what they looked like gona call tony tomm and send these any ways also for back up if there sll good gona put in i suppose

[size=75][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/iPhone.png[/img]

can't send em to brucato and get em flowed and cleaned? lot cheaper than buying new ones

[size=75][b][i][ Post made via Android ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/Android.png[/img]

it has green injectors i pulled one out number on side is as follows 0280 150 036

[size=75][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/iPhone.png[/img]

i just picked up a bridgport been sitting 4 yrs was a running motor when parked disassembled looks clean has 4 steel sleeves nicsil on 3-4 cylinders with stock pistons other 4 are wiseco .20 over with steel sleeves iam needing stator and trigger and what injectors to run 77vipper maybe you can chim in for me thanks

[size=75][b][i][ Post made via iPhone ][/i][/b][/size] [img]http://www.hydrostreamforums.com/images/mobile/iPhone.png[/img]