Hey guys, now the holidays are over and I want to install my windshield. Has anyone found base plate and or top railings?
Thanks
Eric

good. i like it quite a bit. call me if you feel like it. thansk

Ronnie, got the rub rail sample! Looks great Thanks!! got a few questions I'll holler at ya monday.

[ Post made via Android ]

jetmore got a contact so i can order the windshield frame from you greattly appreciated thanks if it is still available and yes will will do the bevel in the middle and ship it sounds good to me no prob here to reinstall as my high frequency tig welder welds aluminum i just weld then polish down or my number is (931)-628-1485 stephen contact anytime

SHIPPING THE FRAME IS THE PRICEY PART. NOBODY WANTS TO SEND IT FOR LESS THAN $300 DUE TO THE DIMENSIONS. I TRIED UPS, FEDEX, DPL, US POSTAL, AND ALL OF THEM WILL ONLY SHIP ON A PALLET AND CHARGE AS THOUGH IT IS A MOTOR BEING SENT. I MADE A FEW OUT OF FIBERGLASS, LOOK AWESOME, MUCH STRONGER THAN THE ALUMINUM BUT SHIPPING IS NOT COST EFFECTIVE. I COULD CUT A NICE LONG BEVEL IN THE CENTER OF THE FRAME AN PUT IT INTO TWO PIECES AND SEND FOR $15! BUT THEN YOU HAVE TO USE A GOOD ADHESIVE LIKE AN EPOXY TO GLUE BACK TOGETHER, AND FAIR IT OUT. NOT A BIG DEAL AT ALL, SHOULDN'T TAKE 20 MINUTES TO SOMEONE THAT HAS WORKED WITH BONDO. ANYWAY. MY TWO CENTS.

I HAVE AN ORIGINAL FRAME, ALSO THAT IS IN NICE SHAPE, AND ANOTHER THAT NEEDS SOME STRAIGHTENING THAT IS ALSO ORIGINAL BUT AGAIN, SHIPPING SUCKS. IF SOME ONE WANTS TO MAKE THE DRIVE, THEY CAN HAVE BOTH ORIGINAL FRAMES FOR $150 TOTAL.

SORRY, I REALLY DIDN'[T MEAN TO JACK THIS THREAD.

bring the shield to a machine shop have them get a piece of stainless pipe and bend it and cot a slice out to side the shield into,but the stainless is harder to work with , you can use aluminum its easier to bend, thats how my top peice was done, I'm tryin to get you some of those washer for the bottom..............and the shiled looks GREATTTTTTTTTTT.............

So who is going to arkanasa I well be going that way next month ? I wonder if we could get a cut rate for a purchase of more then one .Im going to contact them and find out . Ooh yeah sheild looks good.

see my reply, it's at the bottom

Where did you get it from?

Here is there information and her reply to me.
CMT Inc. Monica Smith <boatwindshield@hotmail.com>My tooling guy thinks he has this tooling.....can you trace the bottom shape that the windshield would need to be onto a piece of paper or something and send that template in just to make sure? But yes, he's pretty sure he made tooling for this a few years back for a replacement order. Just estimating from the size of the console, you are looking at at least $150 for the windshield...thats just ball park, I dont know for sure. We will know after we get your traced template.


Thanks
Monica Smith

Custom Mold & Tint Inc.
1991 Hwy 425 S
Monticello, AR 71655
870-367-7083 ph
870-367-9039 fax
"Manufacturing Marine Windshields Since 1979"
<'}}}><{