Just curious but once I do get to the point of laying core , is there something better than balsa and other question is one the balsa is layed would it be better to get it shot over with a chopper gun I know someone who builds boats that's could do it , just wanting the best sealed off way when I ge...

havent did much work on the boat but got out there and just cut on it a little more, havent built a jig or put anymore supports on my trailer, so i havent cut much, and trying to be carefull cause kinda confused where the core balsa stops and starts here is a picture of where i think i opened up the...

Well no telling what else the. Motor has than boring over a man that use to race built it is a 76 model 200 ,,, but transom is solid it does not move any , I think I'm having prop problem I really don't know what would be best prop for that boat that 20 pitch is not enough prop it throws the whole b...

Another question when I start taking all the core out, the boat is sitting on that trailer well how much more support does it need to hold it's right shape will it warp up or will the boat pretty much hold it's self [ Post made via iPhone ] http://www.hydrostreamforums.com/images/mobile/iPhone.png

Ok cause I can look down it at bottom from back and see in just eyeballing it I'm guessing I would see 1/4 inch of daylight

[ Post made via iPhone ]

I seen something about a hook in pad should this boat have a hook in the pad??

[ Post made via Android ]

No it trims up I put a 24 pitch power tech 4 blade on it yesterday and it turned the prop and had a lot more lift when I would stomp it it would stay up better with that prop but loose in the tail end , the 20 pitch ran 55mph pretty straight didn't gps the 24 gonna run it again weekend [ Post made v...

3 blade 20 pitch raker

[ Post made via iPhone ]

Took the blazer out and notice when on plain and u stomp it that tail end raises up which make the front sit down then eventually the front popps up and kinda tries to chine a little my motor is screaming with that 20 pitch going 55 [ Post made via iPhone ] http://www.hydrostreamforums.com/images/mo...

I raised the motor up a knotch should that help

[ Post made via iPhone ]