Once bit, twice shy...

[ Post made via iPhone ]

Call Allison, their seats are reasonably priced and better than anything else out there!

[ Post made via iPhone ]

I'll shoot him a message. I bought the swim steps off his Vector a few years ago.

[ Post made via iPhone ]

Should sell pretty quick. They are getting pretty tough to come buy. :) I dont need them otherwise I would snag them up! No bites here or on SNF yet. I don't want to get rid of them bad enough to post them on FB yet. :mrgreen: [ Post made via iPhone ] https://www.hydrostreamforums.com/ext/sniper/mo...

Not perfect but very nice pair. $150+the ride...



[ Post made via iPhone ]

Neat gizmo! Looking forward to seeing your core job...

[ Post made via iPhone ]

Check around the drain plug on the inside. There’s a wood block glassed in there. That’s one of the first places that will start to rot. Check the core towards the back of the boat. There are usually some places where you can get at it back there. I usually have water get in mine when I have passeng...

My Varmint has the merc control box with just the shift cable and a foot throttle. My Viper had both cables in the control box and a foot throttle. That was a better setup. If you want to cruise or ski, pop off the cowl and swap the throttle cables! [ Post made via iPhone ] http://www.hydrostreamfor...

You will probably need a longer cable for the foot throttle than for the shifter.

[ Post made via iPhone ]

You will need new cables. The Merc and BRP/OMC cable directions are opposite. One is push-pull and the other pull-push, depending on how you look at it. In other words the cables will have to reverse direction from what they are now. If you have an aftermarket control box or shifter and hot foot mos...