whoa there, don't jack the motor up just yet, you need to make sure that thing has cooling water to the motor. you can only run the propshaft even with the pad if you have a low water pickup. Do you have a lwp?

14 inch wood steering wheel anyone? I think so

the seat and transom

well I got motivated, I know I know, I cant make up my mind... but im doing work...

I have found that most guys on this particular forum tend to go balsa after doing some reading about the core materials. It seems the balsa can be a very good core material when laid up carefully. I am also interested in the foam core, but I found it more affordable to do the balsa. As far as vacuum...

yea, find one that has proof of recent core and transom work, with pictures so you can see the quality of the work. core is in the outer structure of the boat, most are rotten.. many of us on here have done the work, and know it is a lot of work.. take time and love to get it done.. and about 3 thou...

I used the back of a hammer to dig most of the foam out, you can get closer with a putty knife when you get down thinner.. then a wire brush if you want to get more out.. if you keep the hull supported I dont see why it would be a problem leaving it through the winter. I had mine hanging freely from...

I belive I ordered 10 sheets for my viper, had two left over when core was done in the bottom. I think I am going to reinforce the deck with the rest, or build something else for the hull support with it

Will probably cover up the top holes. that will simplify using a hose at home when running the motor. Wondering about water pump kits and thermostats? where is a good place to buy? anything else I should know? Is there an easy way to rig up new controls to it?

yes it has pickups underneath! I may close up those top holes