Had a dusting here. I'm fine with that!

poke around in the bolt holes and see the condition of the wood in the stringers. if its just the holes, harden the holes with epoxy and longer bolts. Hopefully the stringers are ok.

Jack it level with the pad and a chopper style prop. Pitch depends on your wot rpm.

Jack and nose cone??? Need to know your bells and whistles.

pm sent Bill.

Let's see if Chet comes trough. If not are you going to the winter party? I plan on going. That would be an easy handoff.

[ Post made via Mobile Device ]

Wow Bill, I wished I knew you had that. Shoppin props!

I used 36 grit. Leaves a good surface. Build it the same way it came apart. I've heard of the vipers done both ways with the stringers. Bulsa is fine just as long as the layup is good. The original builds wern't the greatest. If you notice the wood for the old stringers was junk too. They didn't use...

I had a couple port side helm. A chris craft and a thompson.

I agree with russ. Just add the oil at the same time you get fuel. Just get an even number of gallons and add the oil accordingly for each gallon. Super easy and takes about 2 min longer when at the pump if that. Thats just me though. Otherwise dont remove your oil injection or if it already is, ho...