Page 1 of 1
Ignition help
Posted: May 20, 2012 9:13 am
by vector86
Ok I'm in the process of converting to a push button start and I'm n a little rut! I get the motor to turn over but won't start! I tapped the yel/red wire! So can it be that the ignition is still off? I looked at a mercury's color code and I think I may have to tap some other wires! Any help would be greatly appreciated!
[ Post made via iPhone ]
Re: Ignition help
Posted: May 21, 2012 6:42 am
by jacklake2003
Do you still have a key switch to turn on the ignition?
Re: Ignition help
Posted: May 21, 2012 7:54 am
by Surface Scratcher
More than once, I've had a similar problem only to find that the kill switch had been tripped...
Re: Ignition help
Posted: May 21, 2012 2:59 pm
by vector86
Yes to start it the key must be on! And I need to be able to flip a switch and push the start button!
My kill switch was on!
[ Post made via iPhone ]
Re: Ignition help
Posted: May 21, 2012 3:05 pm
by 77viper
You need a in-off switch with batt. Power in and purple out so ypu can power the purple.
[ Post made via HTC A6277 ]
Re: Ignition help
Posted: May 21, 2012 6:39 pm
by vector86
Yeah I have the switch and battery to it!
[ Post made via iPhone ]
Re: Ignition help
Posted: May 21, 2012 7:26 pm
by idvette
Stupid question, but I've been caught.... Shifter in neutral position? There's an interrupt circuit, right?
[ Post made via BlackBerry ]
Re: Ignition help
Posted: May 21, 2012 8:18 pm
by vector86
I start in gear
[ Post made via iPhone ]