Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
24 Raker on Viper
-
- Hydrostream know it all
- Posts: 997
- Joined: Nov 20, 2009 11:35 pm
- Location: Pleasant Prairie, WI
- Been thanked: 2 times
- Contact:
-
- Getting my feet wet
- Posts: 28
- Joined: Oct 27, 2011 9:36 am
- Location: Goliad, TX
- Contact:
Re: 24 Raker on Viper
well ive been playing around in my viper with this new 24 Raker prop not real sure how fast it is feels quicker but is this little hard to control it's great untill you start to trim up it starts hoping around the more gas you give it the smoother it rides untill it starts to chine walk best i can describe it, then your just trying to hold on i know its not a big speed demon but I can't really open it up any ideas how to gain some control.
Thanks, Ryansviper >)))>
Thanks, Ryansviper >)))>
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: 24 Raker on Viper
Do you have good, tight dual cable steering? How about solid motor mounts? Those two are a must for drive ability and safety. The higher you get the propshaft also helps but will require a low water pickup on the gearcase.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Getting my feet wet
- Posts: 28
- Joined: Oct 27, 2011 9:36 am
- Location: Goliad, TX
- Contact:
Re: 24 Raker on Viper
I have dual cable steering not sure about solid motor mounts what would I be looking for there? The motor has LWP but no set back the transom was raised the center of the prop shaft is about 2" below pad when the motor is trimmed all the way down.
Thanks, Ryansviper >)))>
[ Post made via Mobile Device ]
Thanks, Ryansviper >)))>
[ Post made via Mobile Device ]
-
- Getting my feet wet
- Posts: 21
- Joined: Jul 17, 2009 9:26 am
- Location: South West Missouri
- Contact:
Re: 24 Raker on Viper
I've had really good luck with Rakers on my Vegas XT.
1989 Vegas XT w/ 3.0 OMC Looper
Re: 24 Raker on Viper
do you still happen to have this boat? i have a viper that is very similar to yours and was wondering if you ever got your boat lined out.
-
- Random Topics
- Replies
- Views
- Last post
-
- 1Replies
- 2854 Views
- Last post by Hydrostream Bot
Sep 11, 2010 8:18 pm
-
- 3Replies
- 4246 Views
- Last post by LSaupe
Sep 16, 2010 5:46 am
-
- 1Replies
- 3003 Views
- Last post by Hydrostream Bot
Sep 13, 2010 8:23 pm
-
- 1Replies
- 2979 Views
- Last post by JETMORE
Sep 14, 2010 12:32 pm
-
- 1Replies
- 2626 Views
- Last post by Hydrostream Bot
Sep 14, 2010 1:56 pm
Who is online
Users browsing this forum: No registered users and 6 guests