Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Trying to set up VKING Yt it's a 2003
-
- The new guy
- Posts: 14
- Joined: Mar 28, 2017 1:48 am
- Location: Saraland Alabama
- Contact:
Re: Trying to set up VKING Yt it's a 2003
Battery back of boat on passenger side gas tank center of boat in back
[ Post made via Android ]
[ Post made via Android ]
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 72 times
- Contact:
Re: Trying to set up VKING Yt it's a 2003
My cousin had a similar setup on his VKing several years back.
He got 98mph running a 14.5" x 30 pitch cleaver.
Hippie actually created a thread about his boat.
http://hydrostreamforums.com/viewtopic.php?f=5&t=472
I threw up a video on YouTube of me in it with him driving (obviously) back in 08. Its crappy video quality and over 7 minutes long.
I was trying to get closeups of the tach and speedo but it was a bumpy ride. I eventually gave up and got some over-the-windshield shots.
We got around 85mph. Medium chop on the lake in spots.
But that Merc screams at 6500+.
https://www.youtube.com/watch?v=9qphMYoolxY&t
-------------------------------
He says that your 84 sounds about right for your 26 chopper. Says you'd probably get 100+ with a 30-32 chopper.
And you shouldnt need a jackplate with a 15" mid.
Or are you talking about setback instead of height?
He got 98mph running a 14.5" x 30 pitch cleaver.
Hippie actually created a thread about his boat.
http://hydrostreamforums.com/viewtopic.php?f=5&t=472
I threw up a video on YouTube of me in it with him driving (obviously) back in 08. Its crappy video quality and over 7 minutes long.
I was trying to get closeups of the tach and speedo but it was a bumpy ride. I eventually gave up and got some over-the-windshield shots.
We got around 85mph. Medium chop on the lake in spots.
But that Merc screams at 6500+.
https://www.youtube.com/watch?v=9qphMYoolxY&t
-------------------------------
He says that your 84 sounds about right for your 26 chopper. Says you'd probably get 100+ with a 30-32 chopper.
And you shouldnt need a jackplate with a 15" mid.
Or are you talking about setback instead of height?
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Trying to set up VKING Yt it's a 2003
The Chopper is killin ya. When you get to near the level of the pad, Choppers run out of bite real quick. Send it out and have cup added, that will wake it up. I think you'll want more pitch too, what rpm are you turning?Junior stanley wrote: ↑Mar 28, 2017 7:30 pm I have been 1/2 above no lift almost ride nose down running a 26 chopper I have trying a few different props now
[ Post made via Android ]
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- The new guy
- Posts: 14
- Joined: Mar 28, 2017 1:48 am
- Location: Saraland Alabama
- Contact:
Re: Trying to set up VKING Yt it's a 2003
I can turn it over 7 I think I have turned it about 7600
[ Post made via Android ]
[ Post made via Android ]
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Trying to set up VKING Yt it's a 2003
Something is not right there. With a 26 that thing should want to go over 8000.
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- The new guy
- Posts: 14
- Joined: Mar 28, 2017 1:48 am
- Location: Saraland Alabama
- Contact:
Re: Trying to set up VKING Yt it's a 2003
Your correct I have turned it over 8
[ Post made via Android ]
[ Post made via Android ]
-
- The new guy
- Posts: 14
- Joined: Mar 28, 2017 1:48 am
- Location: Saraland Alabama
- Contact:
Re: Trying to set up VKING Yt it's a 2003
U think I need to just go up 1/2 inch above the pad
[ Post made via Android ]
[ Post made via Android ]
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Trying to set up VKING Yt it's a 2003
It needs to go higher, but going higher is meaningless without a lot more prop.
Setup is a combination, there is no single fix.
Setup is a combination, there is no single fix.
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- The new guy
- Posts: 14
- Joined: Mar 28, 2017 1:48 am
- Location: Saraland Alabama
- Contact:
Re: Trying to set up VKING Yt it's a 2003
True I have a buddy that has a 30 et I going to try it
[ Post made via Android ]
[ Post made via Android ]
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Trying to set up VKING Yt it's a 2003
It should haul *** with that.
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- Random Topics
- Replies
- Views
- Last post
-
- 2Replies
- 67430 Views
- Last post by Hippie459MN
Feb 24, 2019 10:11 am
-
-
Does anyone know of any Hydrostream emblems or decals available?
Last post by Shawnv-king « Mar 05, 2019 8:47 pm - 5Replies
- 85506 Views
- Last post by CleanV-King
Dec 29, 2020 11:32 pm
-
-
- 4Replies
- 76690 Views
- Last post by dehydrated
Mar 08, 2019 11:15 am
-
- 10Replies
- 15248 Views
- Last post by Virage-crazy
Mar 11, 2019 9:59 am
-
- 93Replies
- 49800 Views
- Last post by Hippie459MN
Dec 05, 2021 12:11 pm
Who is online
Users browsing this forum: No registered users and 18 guests