Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.

To visit the HydrostreamForums Knowledge Base CLICK HERE

Hydraulic Steering on 88 Mercury 200

Have questions about setting up your boat? Engine height, setback, prop, etc.
User avatar

Topic Author
jasongrms
The new guy
The new guy
Posts: 5
Joined: Nov 09, 2017 5:25 pm
Location: Statesboro, Georgia
Been thanked: 1 time
Contact:

Hydraulic Steering on 88 Mercury 200

Post: # 22837Post jasongrms »

I want to upgrade my steering on my 1988 voyager from cable to hydraulic. It has a 1988 Mercury 200 Blackmax hanging off of the back. Seastar can't give me any direction on what cylinder I need for this engine since their catalog only goes back to 1989. I would think there would not be much difference, if any, from the 88 Merc to the 89 Merc but I am not sure. Is anyone out there running hydraulic steering on this particular engine model? Just Looking for some direction on what cylinder/system will work. These systems are expensive and I don't want to buy a system only to find out it will not work. Any input would be much appreciated!

Jason

[ Post made via iPad ] Image
User avatar

AdamDK
Moderator
Moderator
Posts: 327
Joined: Jul 19, 2016 6:58 pm
Location: Oshawa, Ontario (near Toronto)
Has thanked: 45 times
Been thanked: 72 times
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22838Post AdamDK »

According to Seastar's PDF, the cylinder required is the same.

http://www.seastarsolutions.com/wp-content/uploads/2015/12/Hydraulic-Steering-Selection-Guide-2015-SL6001-21.pdf

page 27 (of 122)

Cylinder: HC5345-3

And since they list multiple engine mfgr's using the same cylinder, with no options for different mounting plates, I think its safe to assume that the mounting bolt patterns are standardized.
User avatar

Topic Author
jasongrms
The new guy
The new guy
Posts: 5
Joined: Nov 09, 2017 5:25 pm
Location: Statesboro, Georgia
Been thanked: 1 time
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22839Post jasongrms »

Thanks AdamDK! The Seastar tech support guy was directing me to the Seastar Pro series (HC6345-3), so I didn't look any further. Thanks again for pointing this out!

[ Post made via iPad ] Image
User avatar

AdamDK
Moderator
Moderator
Posts: 327
Joined: Jul 19, 2016 6:58 pm
Location: Oshawa, Ontario (near Toronto)
Has thanked: 45 times
Been thanked: 72 times
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22840Post AdamDK »

Ya, running above 60/65mph will require the Pro or Tournament series.
User avatar

alaskastreamin
Hydrostream know it all
Hydrostream know it all
Posts: 512
Joined: Feb 10, 2012 8:01 pm
Location: Sitka Alaska / Okanogan,WA
Has thanked: 5 times
Been thanked: 158 times
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22897Post alaskastreamin »

I run the pro on my boats.
Is the steering arm on your motor the thin style or the fat wide one?
I'm wondering if that is when they changed.
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
User avatar

Topic Author
jasongrms
The new guy
The new guy
Posts: 5
Joined: Nov 09, 2017 5:25 pm
Location: Statesboro, Georgia
Been thanked: 1 time
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22905Post jasongrms »

It looks like the thin style. How can I make sure? This is my first Hydrostream so I am still learning.

[ Post made via Android ] Image
User avatar

AdamDK
Moderator
Moderator
Posts: 327
Joined: Jul 19, 2016 6:58 pm
Location: Oshawa, Ontario (near Toronto)
Has thanked: 45 times
Been thanked: 72 times
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22908Post AdamDK »

Think of this logically.
There's only 1 model year difference between the 88's and 89's.
There's absolutely no way Merc would change the steering arm assembly. If they did, then everyone buying 1989 model year Mercs (and newer) would have had to buy all new steering systems, or adapters, to make their existing steering they had installed work with the new motor.

My dad has dual cable teleflex steering in his J-Craft. He went from using a 1970 Tower of Power 115HP Merc to a 1983/84 150HP Merc XR2 (which seized), back to a 1980 Merc 115HP. He never had to replace or adapt the steering.
User avatar

alaskastreamin
Hydrostream know it all
Hydrostream know it all
Posts: 512
Joined: Feb 10, 2012 8:01 pm
Location: Sitka Alaska / Okanogan,WA
Has thanked: 5 times
Been thanked: 158 times
Contact:

Re: Hydraulic Steering on 88 Mercury 200

Post: # 22909Post alaskastreamin »

I was wondering if the two 3/8" fine threaded holes for the steering rod (cable style) was closer or further from the tilt tube thus making the hydraulic ram mount not reach.
See, with the cable set-up, this wouldn't matter as the stainless arm would pivot to find either hole. See where I was going?

Also maybe the hydraulic ram could overpower the thinner steering arm and possibly break it at full lock. maybe a liability thing. Just speculating..

Here you go.....These are for smaller motors but you can see the shape differences.
Attachments
Thin Arm
Thin Arm
Thin Arm.jpg (526.04 KiB) Viewed 8301 times
Thick Arm
Thick Arm
Thick Arm.jpg (263.63 KiB) Viewed 8301 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Post Reply

  • Random Topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 12 guests