78 VIKING. GETTING STARTED ON THIS PROJECT.

[Don B]

Why do they use little squares instead of one solid sheet for the cores. ?

[ Post made via Android ]

[Don B]

Is that the width of the core. Right up to the floor?

615.jpeg (219.5 KiB) Viewed 1381 times

616.jpg (230.61 KiB) Viewed 1381 times

eyes on the prize. Will be worth it when its done.

[ Post made via Android ]

[Don B]

Anybody thinks this is stupid please let me know before I do it. I can't see a better way there is no lift holes or rings to hook to. I am going to wrap a lift strap around it and pull.

627.jpg (315.42 KiB) Viewed 1370 times

628.jpg (333.38 KiB) Viewed 1370 times

625.jpg (310.07 KiB) Viewed 1370 times

[ Post made via Android ]

[Dlord111]

Did you pull it off already? I made my own bracket. Instead of the Mercury lift sleeve that screws into the flywheel I took 4 bolts out and made a bracket to lift it

[ Post made via iPhone ]

[Dlord111]

[ Post made via iPhone ]

[Hippie459MN]

Hey, thats a good idea. I might have to do something like that. I dont have a lift ring for my Evinrude and I need to get it on my boat here soon.

[Don B]

Oh thanks I didn't want to wrap a strap around it and break stuff. I will make one

[ Post made via Android ]

[Don B]

I didn't know if I should lift on the flywheel I wouldn't have even tried thanks again. Dlord111

[ Post made via Android ]

[Don B]

QR_BBPOST Hey, thats a good idea. I might have to do something like that. I dont have a lift ring for my Evinrude and I need to get it on my boat here soon.

I bet your ready for a motor hippie459MN its been a long road.

[ Post made via Android ]

[Dlord111]

No problem! I'm glad you didn't use the strap. I don't know for sure if that would have turned out the best. I used 1/4 plate and went to the hardware store and got 4 of the flywheel bolts 1/4" longer so I had all the threads I could get without any play

[ Post made via iPhone ]