VULTURE 1977 time capsule

[eelrev]

Here is my baby I have had it for a few years all original ( except motor of course )

[Hippie459MN]

Welcome and that is a very nice vulture! My Vulture is a 1977 also.

Where in MN are you from? I notice the MN reg numbers on the boat.

Also, Check this out... Phoogle Maps

[frogII]

some place on the river
Train in the back ground

[eelrev]

yes sir you are correct just south of lock and dam #6

[kytekeith]

lLove that color. Same as my vector

[eelrev]

Do you need any inline parts i have some

[kytekeith]

What do you have ? I would like to find some 150 , 79 or later electronics.

[eelrev]

I have a complete 150 with a stuck piston still rotates almost the full revolution with a regular shaft and trim pump lower unit has a nose cone. All electonics are there plus carbs good distributer ect...Also a 125 hp short shaft that runs but needs rebuild.

[kytekeith]

Is the year post 79. Has it been rebuilt before? I want a true 150 at propshaft which started in 79 with the electronic ignition, coil per cylinder.

[Maple Leaf]

Is the year post 79. Has it been rebuilt before? I want a true 150 at propshaft which started in 79 with the electronic ignition, coil per cylinder.

Keith, The Inline 6 150-hp was rated at the crank, 1984 and later Inlines only went to a maxium of 115hp Propshaft hp . If you want 150hp at the prop your goina have to go V6