Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

79 Hydrostream vector rebuild

Chat about anything boating or non boating here. Try to keep it clean.
Post Reply
User avatar

Topic Author
seahorsemax
Getting my feet wet
Getting my feet wet
Posts: 15
Joined: Aug 04, 2013 7:18 pm
Location: United States
Been thanked: 1 time

79 Hydrostream vector rebuild

Post: # 26142Post seahorsemax »

Hey Guys ,
I am in process of rebuild of 79 vector , I had the middle pad filled and straighten as i did my last 79 vector many many years ago . Has any one straighten , the next set of chimes , I saw they had the hook in them like the very bottom had , just wondering if the next set of chines were strait would it help eliminate the side to side rock while throttling to WFO. I have also cut and removed the floor and balsa core which was rotted as most are and plan to go back with coosa blue water 26 for stringers and floor if i put a floor back in it . Still need to cut old transom out and will also use composite on it as well . any input would be greatly appreciated . i will also post pics as i process thru this super awesome river ride . Got a 2.5 planned for power ,15 inch and sporty lower
User avatar

PCS9136
The new guy
The new guy
Posts: 3
Joined: Aug 17, 2022 12:02 am
Location: Denver Iowa

Re: 79 Hydrostream vector rebuild

Post: # 26166Post PCS9136 »

How is the rebuild coming? Do you have any pics to post.
I just started redoing a 75 Vector a few months ago. The core is almost out, and I plan to start on the transom soon.
User avatar

Hippie459MN
Site Admin
Site Admin
Posts: 3912
Joined: Mar 25, 2009 7:31 pm
Location: Nowthen, MN
Has thanked: 316 times
Been thanked: 78 times
Contact:

Re: 79 Hydrostream vector rebuild

Post: # 26167Post Hippie459MN »

The "hook" in the pad of the vector is actually a wedge and not a hook. Howard put that there as they were getting super flighty and the very slight wedge was helping keep the nose down without loosing any speed. The wedge is not a big wedge at all but enough to make them much more manageable. As for the chines, Im not sure what you mean by a hook in them. The chines are pretty much out of the water once you're up on the pad. If you are getting bad chine walk then the setup needs some work.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet

1977 HydroStream Vulture - Worlds longest ongoing project. :eek:
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Post Reply

  • Random Topics
    Replies
    Views
    Last post