I am recoring a 1991 Canadian Edition V-King. The old core was not laid out as expected.
There was a layer of Balsa in the pad. This strip is 8' long (from the drain hole) and is the same length as the stringers and the other two strips of core. The other 2 strips are located outboard and separate from the core in the pad. They are separated from the pad by about 4". These strips are about 8" wide. All the basla appeared to be 1/2".
In summary, 3 strips of core, each about 8" wide, 4" between strips, strips and stringers 8 feet long.
Maybe this matters. There is no foot well. Floor was flat right up to the block of wood in the bow. No bulkheads or stringers ahead of the seats.
The core layout seems very minimal. Only 16 square feet of balsa.
Could this be original? Possibly a recore?
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
V-King Core Question
-
- Getting my feet wet
- Posts: 24
- Joined: Jul 12, 2022 10:41 am
- Location: Oshawa, Ontario
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
- Contact:
Re: V-King Core Question
Probably original, my Vision was laid up the same when I had it torn apart.
[ Post made via Android ]
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: V-King Core Question
This is how the VKings core is. The Vulture is like that as well. The Vector and Viper have a lot more core in them.
Take a look at this and the last picture you will see Tonys VKing and how the core is. https://www.hydrostreamforums.com/the-core-what-is-it-and-where-it-is
Hope that helps.
Take a look at this and the last picture you will see Tonys VKing and how the core is. https://www.hydrostreamforums.com/the-core-what-is-it-and-where-it-is
Hope that helps.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Getting my feet wet
- Posts: 24
- Joined: Jul 12, 2022 10:41 am
- Location: Oshawa, Ontario
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: V-King Core Question
Yes, that helps. I still find it strange that there were no bulkheads, stringers or core forward of the front seats. I guess the floor was the reinforcement.
Tony's build is my reference. He did an amazing job. Great pictures and video.
Tony's build is my reference. He did an amazing job. Great pictures and video.
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: V-King Core Question
I wouldnt say there weren't any, just not on the stringers. There was up in the bow that also doubled as an air box from the factory. Some people get rid of them and just put a bulkhead there. I put the "air box" back in my Vulture (exact same core layout as the VKing) when I did the core and stuff. There is also one at front of the floor as well with small holes to let water drain.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Getting my feet wet
- Posts: 91
- Joined: Jan 24, 2013 2:29 pm
- Location: Brooklyn Park, MN
- Has thanked: 5 times
- Been thanked: 40 times
- Contact:
Re: V-King Core Question
Here is mine.
[ Post made via Android ]
[ Post made via Android ]
- Attachments
-
- IMAG0541.jpg (205.44 KiB) Viewed 6569 times
-
- IMAG0544.jpg (277.55 KiB) Viewed 6569 times
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 6611 Views
- Last post by Hippie459MN
Dec 03, 2020 8:36 pm
-
- 6Replies
- 7162 Views
- Last post by msethsmile+
Nov 10, 2020 11:57 am
-
- 7Replies
- 7772 Views
- Last post by idvette
Jun 24, 2021 11:42 am
-
- 11Replies
- 11200 Views
- Last post by msethsmile+
Dec 02, 2020 5:44 pm
-
- 3Replies
- 6080 Views
- Last post by Kuzer
Oct 08, 2020 5:39 pm
Who is online
Users browsing this forum: No registered users and 86 guests