Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
New owner of 89 Hydrostream Verado
-
- HSF Lifetime Supporter
- Posts: 1388
- Joined: Apr 17, 2009 12:41 pm
- Location: New Hampshire
- Has thanked: 4 times
- Been thanked: 20 times
- Contact:
New owner of 89 Hydrostream Verado
let me know if you decide to sell the boat.I may be interested in it
New owner of 89 Hydrostream Verado
I have been making use of the boat, and have been having fun even with the little 90 hp. The new winch setup works great, as I can load the boat quickly and easily with the bunks extending an inch or two past the transom.
I have replaced the jackplate with a manual one, as the land'n'sea one leaked down and the worn bushings resulted in a couple degrees of tuck. Replacing the jackplate gave me a chance to look at the transom more closely and it is more solid than I expected. I also added a reinforcement to the transom which is a 4" aluminum channel in the motor-well that comes to within an inch of each side. The slight bow of the transom remained and the aluminum bent into position, I am taking that as a good sign.
I have also replace the 15" pitch aluminum prop with a 21" pitch Laser II. This change allowed me to see a peak speed of 54 mph and consistent running around 52. This is probably slow for a hydrostream, but I was surprised that a 90 hp motor would get me there. The boat seems to be working well, although days when I can run it on Lake Winnebago are quite limited.
As a side item, I saw a white Hydrostream Verado tied up in Oshkosh, WI on Memorial day. I did not see it run, but my coworker noticed it as well when it was running and said it was pretty quick. Is that boat owned by someone on this forum?
I have replaced the jackplate with a manual one, as the land'n'sea one leaked down and the worn bushings resulted in a couple degrees of tuck. Replacing the jackplate gave me a chance to look at the transom more closely and it is more solid than I expected. I also added a reinforcement to the transom which is a 4" aluminum channel in the motor-well that comes to within an inch of each side. The slight bow of the transom remained and the aluminum bent into position, I am taking that as a good sign.
I have also replace the 15" pitch aluminum prop with a 21" pitch Laser II. This change allowed me to see a peak speed of 54 mph and consistent running around 52. This is probably slow for a hydrostream, but I was surprised that a 90 hp motor would get me there. The boat seems to be working well, although days when I can run it on Lake Winnebago are quite limited.
As a side item, I saw a white Hydrostream Verado tied up in Oshkosh, WI on Memorial day. I did not see it run, but my coworker noticed it as well when it was running and said it was pretty quick. Is that boat owned by someone on this forum?
Re: New owner of 89 Hydrostream Verado
Yes,
I have not been using it much lately, because I have moved to Wisconsin Rapids.
I did get the boat out yesterday, but I got greedy with prop pitch and could not get the boat on plane. Oops.
I have sold the Nissan engine and have a 125HP 1.5L Optimax on the boat now. With this engine and a 26P Trophy plus prop I was able to touch 66 mph. I was over revving the engine and getting power cuts as a result. I tried a 28P Trophy plus prop yesterday, and could not get the boat to climb onto plane. I may try a 27P Trophy plus prop before going back to the 26P one. Fortunately I have access to several propellers, so can try one at a time until I am happy.
Andrew
I have not been using it much lately, because I have moved to Wisconsin Rapids.
I did get the boat out yesterday, but I got greedy with prop pitch and could not get the boat on plane. Oops.
I have sold the Nissan engine and have a 125HP 1.5L Optimax on the boat now. With this engine and a 26P Trophy plus prop I was able to touch 66 mph. I was over revving the engine and getting power cuts as a result. I tried a 28P Trophy plus prop yesterday, and could not get the boat to climb onto plane. I may try a 27P Trophy plus prop before going back to the 26P one. Fortunately I have access to several propellers, so can try one at a time until I am happy.
Andrew
-
- Random Topics
- Replies
- Views
- Last post
-
- 8Replies
- 26171 Views
- Last post by alaskastreamin
Aug 12, 2019 2:18 pm
-
- 14Replies
- 24551 Views
- Last post by Hippie459MN
Aug 13, 2019 3:59 pm
-
- 5Replies
- 14866 Views
- Last post by tnelson77
Aug 20, 2019 5:45 pm
-
- 4Replies
- 14453 Views
- Last post by Surface Scratcher
Oct 01, 2019 3:10 pm
-
-
Glastron GT-150 - Hull mods to make it handle 150 HP
Last post by alaskastreamin « Sep 12, 2019 11:14 am - 54Replies
- 95311 Views
- Last post by Hippie459MN
Dec 05, 2021 12:16 pm
-
Who is online
Users browsing this forum: No registered users and 12 guests