Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
almost there guys !!! check this out
-
- Getting my feet wet
- Posts: 58
- Joined: Oct 18, 2010 8:56 pm
- Location: Oriental , North Carolina / near New bern , nc
- Contact:
almost there guys !!! check this out
A VERY heavely modified 1979 19 ' Vector is now a PROTOTYPE and re regisistered and titled as a 2009 homebuilt
My name is John R. Norton / DBA East Coast Boat Restorations , located in Oriental , NC
In full respect to all of us who love to fly i have recreated this vessel , river tested , and proven this boat to be an advanced riding hull ! I have been keeping the boat hidden till today and would admire seriouse individuals to give input on molding this vessel and hand laying in carbon kevlar and epoxy hulls . By the time the first one would be completed would be in area of 2011 .
The present Stealth Prototype is a two seater only
powered by , a 1985 outboard stock 200 mercury with 20"mid and stock foot , gps numbers 95 into a head wind of 12 to 15 knots and 1'6" chop wide open and cruise .
Please help me to stay modivated in these hard times to continue pushing forward on this vessel , an absolute must ride in life !
former boats 24' 1986 Vilian 3 sold
24 ' Python modified and sold
24' 1986 BAJA with a V-8 rude from the factory ( fire ball metalic red )
21' 1986 Valaro fully rebuilt , painted and sold
19' 1979 Vector X drag boat chopped and cut
19' 2009 Home built prototype STEALTH
there is a vid on utube that is very simulair but is not the one i'm speaking of her , type in hydrosteam vector comp
My name is John R. Norton / DBA East Coast Boat Restorations , located in Oriental , NC
In full respect to all of us who love to fly i have recreated this vessel , river tested , and proven this boat to be an advanced riding hull ! I have been keeping the boat hidden till today and would admire seriouse individuals to give input on molding this vessel and hand laying in carbon kevlar and epoxy hulls . By the time the first one would be completed would be in area of 2011 .
The present Stealth Prototype is a two seater only
powered by , a 1985 outboard stock 200 mercury with 20"mid and stock foot , gps numbers 95 into a head wind of 12 to 15 knots and 1'6" chop wide open and cruise .
Please help me to stay modivated in these hard times to continue pushing forward on this vessel , an absolute must ride in life !
former boats 24' 1986 Vilian 3 sold
24 ' Python modified and sold
24' 1986 BAJA with a V-8 rude from the factory ( fire ball metalic red )
21' 1986 Valaro fully rebuilt , painted and sold
19' 1979 Vector X drag boat chopped and cut
19' 2009 Home built prototype STEALTH
there is a vid on utube that is very simulair but is not the one i'm speaking of her , type in hydrosteam vector comp
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: almost there guys !!! check this out
Welcome to the forum.
your project sounds interesting to say the least. what all have you changed? The bottom at all, what does it weigh? Your #'s sound good. keep at it and keep us posted.
[ Post made via Mobile Device ]
your project sounds interesting to say the least. what all have you changed? The bottom at all, what does it weigh? Your #'s sound good. keep at it and keep us posted.
[ Post made via Mobile Device ]
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- HSF Lifetime Supporter
- Posts: 1388
- Joined: Apr 17, 2009 12:41 pm
- Location: New Hampshire
- Has thanked: 4 times
- Been thanked: 20 times
- Contact:
Re: almost there guys !!! check this out
I ve seen something about this boat somewhere, I dont remember even seen pics but I forget where
-
- Site Admin
- Posts: 3974
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 350 times
- Been thanked: 82 times
- Contact:
Re: almost there guys !!! check this out
19' vector? The vector was only 17'. Did you take one and make it 2 feet longer and if so how did you go about it?
[ Post made via Mobile Device ]
[ Post made via Mobile Device ]
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Getting my feet wet
- Posts: 58
- Joined: Oct 18, 2010 8:56 pm
- Location: Oriental , North Carolina / near New bern , nc
- Contact:
Re: almost there guys !!! check this out
Thankyou for the responces so far guy's !
The rules are in order to take an old hull and make it yours by name ... then there has to be three major changes to that hull design !
1) dbl stepped the pad and enhanced
2) the entire back deck height was lowered down to the height of were your arm would sit and then tapered and domed enclosing the entire back
3) an F-14 (like) window sheild (can not see thru it ) very contoured and airodinamic (sp?) was hard fastened and molded in place , very hard radioused and flows with the body lines half way out the back of boat .
Question ! ) when molded , the cockpitt could easily be fully enclosed with a plexy glass sheild front and back sight and hinged ... would this be an option that anyone would like to have ?
Question ! ) if i mold this windshield design , how many of you guys would like to buy the new version as a bolt on after marked assembly ?
The rules are in order to take an old hull and make it yours by name ... then there has to be three major changes to that hull design !
1) dbl stepped the pad and enhanced
2) the entire back deck height was lowered down to the height of were your arm would sit and then tapered and domed enclosing the entire back
3) an F-14 (like) window sheild (can not see thru it ) very contoured and airodinamic (sp?) was hard fastened and molded in place , very hard radioused and flows with the body lines half way out the back of boat .
Question ! ) when molded , the cockpitt could easily be fully enclosed with a plexy glass sheild front and back sight and hinged ... would this be an option that anyone would like to have ?
Question ! ) if i mold this windshield design , how many of you guys would like to buy the new version as a bolt on after marked assembly ?
-
- Hydrostream know it all
- Posts: 997
- Joined: Nov 20, 2009 11:35 pm
- Location: Pleasant Prairie, WI
- Been thanked: 2 times
- Contact:
Re: almost there guys !!! check this out
Welcome to the site. Sound interesting. I would like to see a picture of the windshield, and the boat. I don't know how secret you are keeping it though. Whatever you feel comfortable showing us would be great. Bill
-
- Getting my feet wet
- Posts: 58
- Joined: Oct 18, 2010 8:56 pm
- Location: Oriental , North Carolina / near New bern , nc
- Contact:
Re: almost there guys !!! check this out
Before pic ! Does anyone reconize this old boat ! JT and I finially just got in contact with each other ...And it's his old drag boat that i started with
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: almost there guys !!! check this out
If you have tried to add pictures they are not showing up, at least not for me.
To answer your question I would think a enclosed capsol would only be desirable for racing as they would be too hot with limited visibility for lake use. If it were used for racing it would also need to be certified with what ever racing body it is used in. I think it would look cool as heck but just not feasable for everyday use.
I'm actually doing something simalar to a vking in bringing the sides in and making it a tandom 2 seater. I only have a loose plan in my loose mind so it will change 10 times before I start with any glass then 2 more times once I start with the glass.
What part of the country are you from?
To answer your question I would think a enclosed capsol would only be desirable for racing as they would be too hot with limited visibility for lake use. If it were used for racing it would also need to be certified with what ever racing body it is used in. I think it would look cool as heck but just not feasable for everyday use.
I'm actually doing something simalar to a vking in bringing the sides in and making it a tandom 2 seater. I only have a loose plan in my loose mind so it will change 10 times before I start with any glass then 2 more times once I start with the glass.
What part of the country are you from?
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Getting my feet wet
- Posts: 58
- Joined: Oct 18, 2010 8:56 pm
- Location: Oriental , North Carolina / near New bern , nc
- Contact:
Re: almost there guys !!! check this out
I want to say Thankyou to all you that welcomed me to this site .
There are many things i can do good in life , unfortunatly , computers is not one ! I can't figure out how to up load a pic but i am working on it !
Probly be a hole lot more usfull of my time to be out in the shop and working on this boat , i been trying to show in here . lol
There are many things i can do good in life , unfortunatly , computers is not one ! I can't figure out how to up load a pic but i am working on it !
Probly be a hole lot more usfull of my time to be out in the shop and working on this boat , i been trying to show in here . lol
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: almost there guys !!! check this out
Sounds good, I know just enough about computers to get in trouble but it is relaxing reading about boats after working all day.
Now gewt it done so we can see it I for one am very interested in it.
[ Post made via Mobile Device ]
Now gewt it done so we can see it I for one am very interested in it.
[ Post made via Mobile Device ]
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Random Topics
- Replies
- Views
- Last post
-
- 6Replies
- 3728 Views
- Last post by Rut311969
May 07, 2011 1:15 pm
-
- 2Replies
- 2897 Views
- Last post by Hippie459MN
May 07, 2011 9:48 pm
-
- 27Replies
- 8361 Views
- Last post by luckydog
Oct 03, 2011 6:17 am
-
- 15Replies
- 7503 Views
- Last post by Sonik
May 09, 2011 12:30 pm
-
- 2Replies
- 2811 Views
- Last post by Hippie459MN
May 08, 2011 8:18 am
Who is online
Users browsing this forum: No registered users and 4 guests