Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
switch box wh/bl wires
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
switch box wh/bl wires
noticed that the white with black stripe wires on my 200 efi mercury were no connected but on the switch boxes i have all modules ect.. off the boat seen were some say to connect them together i touched them together motor seemed to idle up a little any help here what these wires do when connected together and y
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: switch box wh/bl wires
White with black goes to the idle stabilizer . Sounds like yours was removed. Supposed to bump idle up if it drops below 500 rpm's. Advances timing I believe. I would unplug as not to over time at higher rpm's and detonate.
Also a white/ red. (only these two come out of the stabilizer) White/ blk Goes to top left terminal on the outer switch box then jumps to top left on inner box. Only wire on that terminal.
The White/ red is on the top right terminal on the outer box only. Shares that terminal with the same color wire from the stator.
Here's a diagram.
Also a white/ red. (only these two come out of the stabilizer) White/ blk Goes to top left terminal on the outer switch box then jumps to top left on inner box. Only wire on that terminal.
The White/ red is on the top right terminal on the outer box only. Shares that terminal with the same color wire from the stator.
Here's a diagram.
- Attachments
-
- mercury_92up_200_wiring.jpg (397.62 KiB) Viewed 2929 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
Re: switch box wh/bl wires
so i do need to wire them back together or leave undone so there not connected to both switch boxes yes i have no idle stabilazer
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
-
- Random Topics
- Replies
- Views
- Last post
-
- 4Replies
- 94449 Views
- Last post by alaskastreamin
Feb 22, 2019 11:52 am
-
- 17Replies
- 202161 Views
- Last post by AdamDK
Dec 13, 2019 7:07 pm
-
- 2Replies
- 81272 Views
- Last post by Hippie459MN
Feb 24, 2019 10:11 am
-
-
Does anyone know of any Hydrostream emblems or decals available?
Last post by Shawnv-king « Mar 05, 2019 8:47 pm - 5Replies
- 103240 Views
- Last post by CleanV-King
Dec 29, 2020 11:32 pm
-
-
- 4Replies
- 92738 Views
- Last post by dehydrated
Mar 08, 2019 11:15 am
Who is online
Users browsing this forum: No registered users and 3 guests