pm Instigator (Gary) on scream and fly (his site is twostrokesonly.com) great looper guy.
Steve
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
looper vs crossflow
-
- Getting my feet wet
- Posts: 72
- Joined: Sep 22, 2011 2:54 pm
- Location: Mississauga
- Contact:
-
- Getting my feet wet
- Posts: 72
- Joined: Sep 22, 2011 2:54 pm
- Location: Mississauga
- Contact:
Re: looper vs crossflow
porting is'nt cheap though, the 93 up finger port, with 2.7 heads and coolant modd is a good idea, you can machine the stock heads also on the 93 and up. bought for the right price, good solid motors that will run a long time. I had an 89 225 limited edition evinrude with .700 deep chamber #331490 2.7 heads, plugged idle reliefs, no baffle in airbox, timing backed to 16 degrees for marina gas 145 lbs compression, with stock porting and it screamed.
Steve
Steve
Re: looper vs crossflow
you ought to look up wilbur weeks in florida, he's an old man now, but he built a really fast vector for his son, wayne, set a record with it, it think 110 mph or so. it was a worked 235. the looper is awesome but that is so much weight on the vector. if you are only looking for 100, you can go cheap with a 235 that is built. send the power head to al stoker, tell him what you want it to do, and 100 isw easily obtainable on a usable 235 that you can still cruise in. the biggest thing will be SET UP!!! THIS IS ALWAYS THE BIGGEST THING, BUT, YOU WILL HAVE THE POWER TO DO IT, THEN. while the motor is at stokers, flip the boat and blueprint everything. if going 100, you better check the core really well. tap all over the bottom, and "if in doubt, drill it out," if it is good inside, then clean out the hole with an allen wrench on a drill and fill it with g-flex.
-
- Regular
- Posts: 215
- Joined: Apr 09, 2009 10:47 pm
- Location: Saginaw, Michigan
- Has thanked: 13 times
- Been thanked: 9 times
- Contact:
Re: looper vs crossflow
A 225 pro max with an ecu upgrade on a Vector will easily get you to 100 with all the good stuff like sportmaster, injection etc etc with very little fuss. 3.0 omc's on a Vector are a weight distribution nightmare.
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: looper vs crossflow
How about a 20" 235 offshore evenrude (Pretty much stock) with a LWP on a vulture with 10 inches of set back? 100+mph
Thats what I am working with.
Thats what I am working with.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Random Topics
- Replies
- Views
- Last post
-
- 2Replies
- 7307 Views
- Last post by blowitup
Mar 05, 2012 12:23 pm
-
- 8Replies
- 6044 Views
- Last post by medfordvixen
Nov 02, 2012 10:29 am
-
- 24Replies
- 20320 Views
- Last post by varmint1
May 04, 2012 9:51 am
-
- 2Replies
- 2904 Views
- Last post by JUPITER VALERO
Mar 16, 2012 12:07 pm
-
- 7Replies
- 4462 Views
- Last post by Bad_Influence
Mar 08, 2012 2:14 am
Who is online
Users browsing this forum: No registered users and 67 guests