Hydrostreamforums.com - The only dedicated Hydrostream forum

Hey guys I was reading about the 1978 vandal project and bruzercomp81 was saying he was going to mod out he's gt 150 I was wondering what kind of mods are available beside shaved heads are there fuel injection kits available for this motor I have a 1990 gt 150 hung on the back of 1984 valero stock expect for 200 carbs and little shaving on heads and boyseen reeds any help and information about this would be greatly appreciated thanks for everyone help and info if anyone can point me in right direction or send website for mods available thanks keep em on the pad

[ Post made via Android ]

What so funny Russ? He could just do like you did... Mister 150 decals.

For a site that claims to be helpful to all fellow streamers you know RUSS F sure is a ****

[ Post made via Android ]

but it was ok for you to knock my boat on MY for sale thread........HUHHHHHHHHHHHH............................up your nose with a RUBBER hose...........

Well the few mods I did to mine were scalloped the positions and block, raised the exhaust ports to 200 specs, matched the front half of the block to the back half of the block, and cleaned up the intake.

[ Post made via Android ]

Alright kids....

As for Russ, Cut him some slack, hes old and still uses AOL. Really though, lets all just get along here, k.

Thanks for the info bruzercomp81 where did you get the 200 specs

what do you mean by scallopedy the pistons did you replace thrme

[ Post made via Android ]

I picked up a 200 for back up and did a few things to it and then modded my 150 to the stock specs of the 200 and then did more. The scallopes are cuts in the block under the intake ports, like half circles, and match that to the pistons. I get a pic up soon of what I'm talking about.

[ Post made via Android ]

This is the cylinders but I don't have a pic of the pistons.

[ Post made via Android ]