Partial recore on a vector maybe.

[BrandonReed]

I'm going yo measure this boat. And take some pictures of the bottom maybe one of you guys can tell me if it's a vector or a vking.

[ Post made via Android ]

[AdamDK]

It's a Vector.

Vking has panels that go from the deck to the floor on both sides next to the front seats.

You should also see 3 lifting strakes on the hull. VKings only have 2.

Vectors pad is concave, like the bottom of a water ski. VKings are flat.

[ Post made via Android ]

[Hippie459MN]

Not the greatest picture but here you can see my Vector and the 3 lifting strakes on the bottom. Like Adam said, a VKing will only have 2 strakes. And the VKing has deck supports going to the floor (Unless someone cut them out, like they did in my Vulture) as where the Vector does not have them.

20160828_092356_resized_0.jpg (1.04 MiB) Viewed 7171 times

[BrandonReed]

Thanks.

[ Post made via Android ]

[Hydrostream 1]

I just started the same project. I got the boat for the windshield and frame. To repair my Vulture but decided to recore the hull.

[ Post made via iPhone ]