The UMPBA is having it's second event of the year on June 18 in Hanska MN. Registration is Friday night in Hanska at the city park food and beverages provided. After that we will bring the party out to the county park for some partying and camping. We will do qualifying runs to be sure every one is in the correct class on Saturday from 8-10:30 with registration cut off at 10:30. Drivers meeting will be at 11:00 and the race starts at 12:00.
Classes and Requirements
Lake Racer
* 65 mph or less
* Life Jacket
* Ignition kill switch
* DOT approved helmet
Lake Racer 1
* 66 - 75 mph
* Life Jacket
* Ignition kill switch
* DOT approved helmet
Lake Racer 2
* 76 - 85 mph
* Life Jacket
* Ignition kill switch
* Fuel kill switch (if so equipped w/external fuel pump)
* Life Jacket w/legs straps
* Foot throttle's only
* DOT approved helmet
Lake Racer 3
* 86 - 95 mph
* Life Jacket
* Ignition kill switch
* Fuel kill switch (if so equipped w/external fuel pump)
* Life Jacket w/leg straps
* Foot throttle's only
* DOT approved helmet
Lake Racer 4
* 96 - 115 mph
* Life Jacket, Lifeline or SRP
* Ignition kill switch
* Fuel kill switch
* Ballistic shorts (lifeline, SRP or Deist)
* Foot throttle's only
* Helmet restraint system w/neck donut
* Dot approved helmet
Unlimited
* 116 mph and faster
* Life Jacket, Lifeline or SRP
* Ignition kill switch
* Fuel kill switch
* Ballistic shorts (lifeline, SRP or Deist)
* Foot throttle's only
* Helmet restraint system w/neck donut
* Dot approved helmet
How a race is ran:
* Boats are set up into the five classes shown above. Anything over 2mph over your class is an
automatic disqualification.
* All types of watercraft are encouraged to participate. Therefore special classes may be added
to the race if needed in an effort not to eliminate anyone (i.e. jet skis, family runabouts).
* Boats are paired up randomly for each class in double elimination heats.
* Race pairs are lined up at a starting line (course set up with anchored buoys).
* Race heats are official after starting flag is raised by starter.
* During a race heat, boats must not cross the finish line on the "wrong" side of the center line buoy.
Boat "A" must not enter boat "B's" lane, or visa versa or go outside any marked lanes doing so
will result in a loss for that heat.
* The "Black Flag" will be used to clearly identify any racer that does not comply with the rules and regulations
set forth by the UMPBA. You will get one warning, the next infraction and your done racing.
* Finish line video equipment can be used to help the finish line judge determine the winner of each race heat.
* All decisions made by the starting/finish line judge are final.
* The Awards ceremony will be after the race course has been picked up and brought in, we would like as
much participation as possible as the winner's deserve the recognition.
Feel free to call me at 952-292-8884 for more info.
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Hanska MN boat drags
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Hanska MN boat drags
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Site Admin
- Posts: 3969
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 80 times
- Contact:
Re: Hanska MN boat drags
Looks like someone got there trim pump working right.
I had a good time out there and was nice seeing everyone. To bad I couldnt stay longer but little guy was getting cranky so we decided to head for home.
Chet, Now ya kinda seen the RV so you know what I am working with.
I had a good time out there and was nice seeing everyone. To bad I couldnt stay longer but little guy was getting cranky so we decided to head for home.
Chet, Now ya kinda seen the RV so you know what I am working with.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream Addict
- Posts: 344
- Joined: Apr 11, 2009 11:17 pm
- Location: Central Texas
- Has thanked: 1 time
- Contact:
Re: Hanska MN boat drags
Wish I'd could have been there, but it was a little far for me.
Did you run well, Chet?
Did you run well, Chet?
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: Hanska MN boat drags
It was nice to see ya Kevin, I wish I had more time to talk to you and your family. Lee is sure getting big, I hope he had a good time.
My boat ran like crap. I was way fat and ran on last weeks spark plugs. When I purge the methanol out of the system I have to run gas through the system at about 5000 rpm and it just coats everything with the extra fuel. In the nitrous class I didn't do too well because of low bottle pressure. I think I have a system worked out to keep the temps up between a AC bottle heater to start, then switch to my DC one to maintain the temp.
All in all it was a fun weekend of camping, racing, and a whole lot of beach racing. We actually have just as much fun hanging out in the campground talking boats all weekend as we do actually racing.
My boat ran like crap. I was way fat and ran on last weeks spark plugs. When I purge the methanol out of the system I have to run gas through the system at about 5000 rpm and it just coats everything with the extra fuel. In the nitrous class I didn't do too well because of low bottle pressure. I think I have a system worked out to keep the temps up between a AC bottle heater to start, then switch to my DC one to maintain the temp.
All in all it was a fun weekend of camping, racing, and a whole lot of beach racing. We actually have just as much fun hanging out in the campground talking boats all weekend as we do actually racing.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Site Admin
- Posts: 3969
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 80 times
- Contact:
Re: Hanska MN boat drags
I wish we could have stayed longer too but between my little cousin and Lee I think they were wiped out for the day so we decided to get them home before it go to late. Was about a 3 hour drive back. I had a really good time and cant wait till Faimont for sure and I hope (Gets on knees and prays lol) I have a boat by then.77viper wrote:It was nice to see ya Kevin, I wish I had more time to talk to you and your family. Lee is sure getting big, I hope he had a good time.
I will post a few more pics I did manage to grab here and over at umpba.org after a bit. I some how managed to forget the video camera and the good camera in my suburban at my moms house so was just working with my pos point and shoot so they are nothing to fancy.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Random Topics
- Replies
- Views
- Last post
-
- 1Replies
- 19741 Views
- Last post by JAMMICHIGAN
Jun 01, 2021 12:14 pm
-
- 5Replies
- 32312 Views
- Last post by Hippie459MN
Oct 09, 2022 7:10 am
-
- 3Replies
- 22697 Views
- Last post by Hippie459MN
Jun 20, 2021 7:42 am
-
- 3Replies
- 28560 Views
- Last post by Hippie459MN
Jul 05, 2021 5:14 pm
-
- 3Replies
- 35592 Views
- Last post by Hippie459MN
Jul 31, 2021 9:39 am
Who is online
Users browsing this forum: No registered users and 9 guests