Hydrostreamforums.com - The only dedicated Hydrostream forum

Scheduled for Oct 20. We will meet at Kinnikinnic at 10am and run to Nauti Hog to get started with some bloodies and to watch Jerry rewire his bilge pumps on the beach.



Get the word out!!!!!

Unless the weather is totally crap, Caprice says WERE GOING!!! Yes dear.
If we plan on driving 23 hours EACH WAY,.....you guys better show up!!

Wannabe,

If we drive over,(wed 17th) Billings, MT- Miles city, MT will be about 1/2 way (10-12 hours). From there to St. Paul is another 10-12 hours. Fargo is 4 hrs from St. Paul. Sooo depending when we get back on the road from billings area, we should be going thru Fargo around 4:00-6:00 pm (Thurs 18th). Might be a good time for a dinner break.

I might have to pull the viper back out of storage for this. It will be nice to meet you Ron.

That could end up being good timing. I do work that day into the evening, but id definitely swing over and take a peek....

I will mark it on my calender and hopefully someone wouldnt mind me tagging along.

Bags packed, flying out tomorrow. Head out of Eastern Washington Late Tues or Early Wed. am. Arrive St. Paul area Thurs evening. Were stoked!!! Hope there's a good turnout.

Latest forcast for Sat:
Saturday, 20
52 | 34 °F
Partly Cloudy
Chance of
Precipitation 0%

Whoo Hoo!!!

Hippie, Call/ text me if you need a lift (907) 738-1633

What ya got in the big package?

Will let ya know more by Wed or Thurs for sure. Have a bday party for the niece Friday night but other then that, I got nothing going on. Where abouts is everyone launching at?

Chet, You going to make this one also?

Got this from Peter this morning.
http://mapq.st/PrSVpJ
Point 1 on this map is the boat launch. Point 2 is where we will meet at 10am. Point 3 is Nauti Hog.

The white box has some 8 ply resin coated plywood 1" thick. Going to put two layers in the Virage with knee braces.
Totes have ribbed laminating rollers, mixing buckets, rollers, brushes, cloth, woven roving, catylist dispenser, mixing sticks, jigsaw, sawzall, pry bars, and so forth. Everything else is already in the shop. Got 10 gal of resin and 5 gal of core bonding putty delivered last week.

OK, gotta run to the airport. Further posts will be from my Iphone.

Had a great time. Thanks too all! You shouldn't have been so nice to us, 'cause now we're gonna be back....

...more....