Welcome to HydrostreamForums.com
Dont forget to log in or register to take full advantage of the forums.

It only takes a few minutes to register and you can do so by CLICKING HERE

Viper rebuild and race for pinkslips

Have questions about fiberglass, gel-coat, or core repairs well as composite questions?
User avatar

Hippie459MN
Site Admin
Site Admin
Posts: 3396
Joined: Mar 25, 2009 7:31 pm
Location: Crown, MN
Has thanked: 36 times
Been thanked: 14 times
Contact:

Re: Viper rebuild and race for pinkslips

Post by Hippie459MN » Apr 24, 2017 7:48 am

I would like to know this too. Whats the status of this build? Pictures?
-Kevin
Project Hydrostream Vulture | The Vulture Wish List | Project Vector | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project. :eek:
1982 Hydrostream Vector
1982 Hydrostream Vamp
1976 CobraJet Jet Boat - Outboard conversion project
199? Glastron - aka Boat Anchor
1976 Pontoon - aka The Family Truckster

User avatar

Topic Author
bondo4days
The new guy
The new guy
Posts: 7
Joined: Jan 14, 2017 12:17 am
Location: ofallon MO

Re: Viper rebuild and race for pinkslips

Post by bondo4days » Jun 15, 2017 8:18 am

The shop has been super busy so I haven't been working on the boat but the race is 2.5 weeks away so I got back on it tonight. I got most of the rest of the core out and my 3/4" marine plywood cut. I made the stringers an inch taller and kicked them up to the bottom of the splashwell. I also got my materials in. 2 sheets of 1/2" balsa, 5 sheets of 3/8" balsa 4 gallons vinyl ester resin, cabisil, 1708, some 1.5 Oz chopped mat and some chopped fibers

User avatar

Topic Author
bondo4days
The new guy
The new guy
Posts: 7
Joined: Jan 14, 2017 12:17 am
Location: ofallon MO

Re: Viper rebuild and race for pinkslips

Post by bondo4days » Jun 15, 2017 8:28 am

20170614_191311 - Copy.jpg
20170614_191311 - Copy.jpg (1.09 MiB) Viewed 22 times
Attachments
20170614_194811 - Copy.jpg
20170614_194811 - Copy.jpg (1.06 MiB) Viewed 22 times

User avatar

Hippie459MN
Site Admin
Site Admin
Posts: 3396
Joined: Mar 25, 2009 7:31 pm
Location: Crown, MN
Has thanked: 36 times
Been thanked: 14 times
Contact:

Re: Viper rebuild and race for pinkslips

Post by Hippie459MN » Jun 15, 2017 9:22 am

Very nice! You're probably going to need a lot more resin. My vulture used close to 15 gallons to do transom, core, stringers, and floor. I know my boat is 20' but my core also doesn't go all the way up the sides like a Viper and Vector do. I don't know where you ordered your supplies but Express Composites here in Minneapolis has resin by the 5 gallon bucket (I bought 2 to start with). A lot of members here have ordered from them too.

[ Post made via Samsung Galaxy S5 ] Image
-Kevin
Project Hydrostream Vulture | The Vulture Wish List | Project Vector | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project. :eek:
1982 Hydrostream Vector
1982 Hydrostream Vamp
1976 CobraJet Jet Boat - Outboard conversion project
199? Glastron - aka Boat Anchor
1976 Pontoon - aka The Family Truckster

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest