I am close to the point of painting the hull and the top of the valero. The boat will not sit in the water for more then 24 hrs(if even). The original gel on the hull is terrible(it may have even been re-gelcoated) with some crazing, and some war wounds. The deck had 3 different layers of paint. I have sanded it down to the original gel . I am looking at using a 2 part epoxy primer(entire boat )and then paint. Nothing special just white.
What primer would work best Interlux 2000 or Petitt. Awlgrip is not readily available in Canada.
What paint(again thinking a 2 part epoxy) for the hull and for the deck?
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Painting Hull
-
- The new guy
- Posts: 8
- Joined: Sep 19, 2017 3:32 am
- Location: Orono On
- Has thanked: 3 times
- Contact:
Re: Painting Hull
I have used some epoxy over bare areas and am going to use the epoxy filler to sharpen pad and transom the edges.
I am open to gel .as I have bought no finishing material yet.
Parts of the bottom were re-geled once and it did flake or craz , do to poor prep I guess.
Is there an epoxy build up primer that can be layed down before the gel is applied to create a good surface?
I am open to gel .as I have bought no finishing material yet.
Parts of the bottom were re-geled once and it did flake or craz , do to poor prep I guess.
Is there an epoxy build up primer that can be layed down before the gel is applied to create a good surface?
-
- Random Topics
- Replies
- Views
- Last post
-
- 3Replies
- 3620 Views
- Last post by silkeysak
Mar 22, 2013 10:47 pm
-
- 1Replies
- 3954 Views
- Last post by bhbestcustoms
Mar 21, 2013 10:29 pm
-
- 2Replies
- 3027 Views
- Last post by Hippie459MN
Mar 22, 2013 11:47 am
-
- 4Replies
- 3717 Views
- Last post by LSaupe
Mar 28, 2013 7:39 pm
-
- 3Replies
- 10156 Views
- Last post by transomstand
Mar 24, 2013 9:00 am
Who is online
Users browsing this forum: No registered users and 3 guests