Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.

To visit the HydrostreamForums Knowledge Base CLICK HERE

Ski Pylon

Have questions about fiberglass, gel-coat, or core repairs well as composite questions?
User avatar

Topic Author
Joker Jake
Getting my feet wet
Getting my feet wet
Posts: 24
Joined: Jul 12, 2022 10:41 am
Location: Oshawa, Ontario
Has thanked: 1 time
Been thanked: 1 time

Ski Pylon

Post: # 26374Post Joker Jake »

While I ponder installing the floor, I got interested in the ski pylon.
The pylon was previously installed through the deck immediately behind the rear seat.
It can't go there anymore because I am moving the fuel tank from the bow to the rear and the tank blocks that location.
Also, the previous location had a bad geometry that would cause trendous upwards force on the main pylon under load. It would lift the floor. The struts were too steep and too wide.
My thought was to put the pylon tight to the front of the rear seat. Much better geometry and perhaps the pylon will keep the rear seat in position.
To do this I will need to move the strut supports because the struts block access to fuel fill and to the rear light socket.
Not a big deal. I marked potential locations with green tape. (not the tape in the side view)
Two people could still sit in the back seat ("watch out for that strut beside your head"), but it would be better for one person.
Any input would be appreciated.
20230619_101846.jpg (347.22 KiB) Viewed 18321 times
20230619_101911.jpg (393.73 KiB) Viewed 18321 times
20230619_101900.jpg (423.14 KiB) Viewed 18321 times
20230619_103054.jpg (471.58 KiB) Viewed 18321 times

  • Random Topics
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest