Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I was in the motor yesterday and was looking at the carbs the top one looks like its open at full but the middle carb looks like it should be more open and i cant really see the bottom one, is there a thread on adjusting or "syncing" these to open them or does anyone have experience on these carbs?
There should be a screw on top of middle and bottom carb where the plastic shafts come down from top and middle carb that has a slot, loosen the screw on the middle carb and hold top carb full open ( may need a second set of hands or tie open the top carb) then hold middle carb full open and tighten screw, do the same for bottom carb, also check the plastic shafts for breaks. I hope this helps wish I could send you some pics
here is a pic of the middle carb at full throttle the bottom carb was turned in even more than this i dont know how far off this is im not a mechanic but i adjusted them and they are all straight open now:)