Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
new member with a 78 viper
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: new member with a 78 viper
removed the float boxes. I cleaned them up a bit after the pics
some of the transom and splashwell fitment
some of the transom and splashwell fitment
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: new member with a 78 viper
well not too much, it started getting too cold to lay glass so that has gone nowhere. BUT I did start tearing down the old seats to re cover them. Went to the fabric store and got some marine vinyl in grey and red to match the boat. That was a messy teardown. I will post a pic or two shortly. I did find the basic frame of the seats are fiberglass. Who knew!?
-
- Getting my feet wet
- Posts: 52
- Joined: Mar 10, 2011 5:46 pm
- Location: orange park florida
- Contact:
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: new member with a 78 viper
I told you guys I was working on the new seat covers, and today I got the sewing machine going alright. so here is what I got done, needs a little more cushion on the seat to take up some slack I think.
- Attachments
-
- new vinyl 4.jpg (17.56 KiB) Viewed 29319 times
-
- new vinyl 3.jpg (18.19 KiB) Viewed 29319 times
-
- new vinyl 2.jpg (18.81 KiB) Viewed 29319 times
-
- new vinyl 1.jpg (16.31 KiB) Viewed 29319 times
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: new member with a 78 viper
okay, so the time finally came, ordered up some balsa core and cabosil to bed it down, got the glass I will need, and I patched up these damaged spot on the bottom. Now, for the smaller chips in the strakes, and some sharpening on the edges, what should I use? Need guidance for the chip repairs along a lot of the strakes, and sharpening the edges near the rear
- Attachments
-
- hull repair pad.jpg (311.26 KiB) Viewed 29228 times
-
- hull repairs 5 14 14.jpg (418.07 KiB) Viewed 29228 times
-
- hull repair bow 5 14 14.jpg (323.72 KiB) Viewed 29228 times
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: new member with a 78 viper
had some beautiful weather today, so I started my core install in the pad. have the boat hanging naturally from the bow eye and weight supported on the rear corner of the strakes that are at the bottom edges of the transom. nothing will be pushing on the flat parts of the hull, and it seems extremely straight that way. here is how it looks right now
- Attachments
-
- core in pad bedded, half glassed.jpg (368.79 KiB) Viewed 29202 times
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: new member with a 78 viper
progress today
- Attachments
-
- splashwell delete being installed not glassed yet.jpg (351.36 KiB) Viewed 29195 times
-
- core being bedded in update.jpg (370.16 KiB) Viewed 29195 times
-
- core being bedded in update left.jpg (367.12 KiB) Viewed 29195 times
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: new member with a 78 viper
Looking good!
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
-
- Random Topics
- Replies
- Views
- Last post
-
- 6Replies
- 6314 Views
- Last post by Surface Scratcher
Feb 05, 2010 12:02 am
-
- 2Replies
- 4494 Views
- Last post by Hippie459MN
Feb 04, 2010 10:21 am
-
- 3Replies
- 8763 Views
- Last post by Hippie459MN
Feb 04, 2010 9:30 pm
-
- 4Replies
- 5512 Views
- Last post by HST4ME
Feb 06, 2010 1:07 am
-
- 16Replies
- 18213 Views
- Last post by upper decker
Mar 31, 2011 9:56 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 79 guests