got the rest of the core sealed up. and ran out of resin. more money needed and running low on glass. should have ordered 10 gallons of resin + hardener the first time. question for you guys, is a 6 inch tall stringer enough for the center and outer stringers for a non floored boat?

radiused core and glassed some in. next nice day the core glassing will be complete. then onto stringers

YDOC462 wrote:yep keep pushing forward

Im doing as much as possible before I start working again next week. wanna get the core all sealed up so it doesn't get ruined by weather

Hippie459MN wrote:Looking good!

thanks!

progress today

had some beautiful weather today, so I started my core install in the pad. have the boat hanging naturally from the bow eye and weight supported on the rear corner of the strakes that are at the bottom edges of the transom. nothing will be pushing on the flat parts of the hull, and it seems extremel...

okay, so the time finally came, ordered up some balsa core and cabosil to bed it down, got the glass I will need, and I patched up these damaged spot on the bottom. Now, for the smaller chips in the strakes, and some sharpening on the edges, what should I use? Need guidance for the chip repairs alon...

what's with the trim tab looking things on the wings? factory? modification? what do they do?

HSP hydrostream Pipkorn

I told you guys I was working on the new seat covers, and today I got the sewing machine going alright. so here is what I got done, needs a little more cushion on the seat to take up some slack I think.