Hydrostreamforums.com - The only dedicated Hydrostream forum

I just noticed some screws in your rigging hose at the adapters. That to keep the hose from coming off? I might need to do that on the motor side of my boat and never thought of doing that.

Kevin, those are 1/8” aluminum pop rivets.
The hose that came with the bezels was slightly larger than the barb section and wanted to come off.
I’ll dab some black paint on the rivet heads to make less noticeable.

[ Post made via iPhone ]

The trailer was looking shabby so it got some paint.

[ Post made via iPhone ]

Figured some striping would look nice.
A friend gave me a roller striper. Thought I would give it a try compared to brushing.
This thing is amazing!!! Load the reservoir, set the guide and go to town. Nice clean lines. Took 30 minutes.

[ Post made via iPhone ]

I put together an interior ( in the interior section), https://www.hydrostreamforums.com/viewtopic.php?f=48&t=4448&p=26332#p26332


This project is done….

[ Post made via iPhone ]

Sweet package

[ Post made via iPhone ]

Looks great Ron!!!! Cant wait to see some pictures of it in the water.

Amazing job. Hopefully it will run as good as it looks!

Hi Ron,

I'm late coming in on this build. Obviously you are an absolute master at restoring Hydrostream boats!!! The HST looks absolutely fabulous!!!! Your hard work and dedication to this complicated project will certainly be recognized when you take it out on the water! Thanks for sharing your knowledge and journey on this boat with us!!!!

Mike B.

Thanks for the kind words!!

I hope by documenting these projects, may help folks down the line see how it’s done.
Ron

[ Post made via iPhone ]