Page 1 of 1

Trailers

Posted: Jul 16, 2018 5:12 pm
by bottomofdaboot69
Anybody got any sweet trailer restorations? just looking for some ideas!

Re: Trailers

Posted: Jul 16, 2018 7:43 pm
by Hippie459MN
None yet here. Im not going full resto but I am going to be redoing a few things on mine here very very soon and will be sure to take pictures along the way. :up:

Re: Trailers

Posted: Jul 16, 2018 8:22 pm
by AdamDK
Same. My galvanized trailer is a POS, but once my Viper is done (whenever that may be), the trailer it's on will be next.

Re: Trailers

Posted: Jul 16, 2018 9:17 pm
by Hippie459MN
As you can see, the wood behind the fender is missing, the wood that is on there is all rotted, some of the marker lights dont work. The tail lights do though but im going to switch everything to LEDs. First order of business though is to swap out the hubs to some 5x4 1/2" hubs (Pretty standard rim size and most chevy rims) with studs. The POS hubs on it now are 5x4 1/4" with bolt style lugs, not studs with lug nuts. Im also going to be swapping to 15" rims and ditch them little 13" ones. I figure I will have about $150 tops, into the trailer when im done.
20160910_160832_resize.jpg
20160910_160832_resize.jpg (1.82 MiB) Viewed 7476 times
I will be doing the hubs in about 2-3 weeks. In the middle of moving right now so its just sitting in the new garage FULL of all the boat parts. Cant see em all in the pic but the boat is loaded with boxes and parts. lol
37048506_10216159901768851_4218812981766520832_o.jpg
37048506_10216159901768851_4218812981766520832_o.jpg (279.28 KiB) Viewed 7476 times
Yeah, I know, it needs a really good bath. Other than moving it to my new place, I havent touched in since last summer when I pulled all the old rub rail junk off it.

Re: Trailers

Posted: Jul 17, 2018 7:12 pm
by bottomofdaboot69
id like to get a nice aluminium trailer for my vking, between the salt water and moister here down south trailers don't last what so ever.

Re: Trailers

Posted: Mar 06, 2019 11:53 pm
by tnelson77
Here's what I did to the trailer my Viking will be riding on. Bought it with another boat on it and swapped the bunks around to fit my boat. It also didn't have a winch setup before. Just a bar that hooked to the bow eye. I didn't like that Idea so I added a winch and bow stop. A friend of mine was working for a paint shop so I had the whole thing sand blasted and repainted. Did all new LED's, wood and carpet on the bunks. Also did the coupler, winch, and jack. The winch and jack are cheap junk from Northern Hydraulics. I'll be replacing those with something quality this spring.