Hydrostreamforums.com - The only dedicated Hydrostream forum

Anyone know how to remove these ski tower strut supports? Feels like it is completely foamed over when reaching from underneath for a nut. The boat is a 92 vassarette.

thanks!

[ Post made via Android ]

Very well could be flotation foam under there. Any chance you can get a picture up under there?

I had those installed in my Viper. I didn't have foam sprayed around them, but the underside was unglassed plywood and the nut/washer was embedded into it. You'll need a couple of medium or large size ViseGrips to get those things removed.

[ Post made via Android ]