Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
new to fourms having a problem with my trim
-
- The new guy
- Posts: 3
- Joined: May 03, 2010 8:21 pm
- Contact:
new to fourms having a problem with my trim
hey guys i wanna start off by saying hi and you guys have helped me with a lot so far with everything.. I have a 84' viper with a small 100 merc I just got it in the water yesterday it ran great, and today I got in the boat put the trim all the way down got on it and trimmed up the boat ran great again but when i went to trim back down it did not do anything it only wants to go up. i played with wires and all but i dont think it a loose wire maybe an air lock? please help thank you guys
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: new to fourms having a problem with my trim
Welcome to the forums.
If there are two wires going into the trim pump motor, one blue and one green the one will be power and the other ground depending on witch way it was going positive to blue for up and green for down. If it's a three wire the black is ground and the blue, green are positive.
First check for power going to the motor in both directions. If there is power going up but not down it's most likely a bad solenoid.
If there are two wires going into the trim pump motor, one blue and one green the one will be power and the other ground depending on witch way it was going positive to blue for up and green for down. If it's a three wire the black is ground and the blue, green are positive.
First check for power going to the motor in both directions. If there is power going up but not down it's most likely a bad solenoid.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Regular
- Posts: 134
- Joined: Apr 05, 2009 11:05 am
- Contact:
Re: new to fourms having a problem with my trim
I had a similar problem with my Evinrude trim.... Like 77 Viper said, the problem with mine was the solenoid. To test, I simply swapped the two solenoids. As soon as I did that, it would trim down but not trim up (the opposite as before the swap). Good luck
-
- Random Topics
- Replies
- Views
- Last post
-
- 2Replies
- 2418 Views
- Last post by 77viper
Apr 24, 2010 10:26 pm
-
- 8Replies
- 4437 Views
- Last post by king gill
Oct 29, 2009 8:26 am
-
- 33Replies
- 8227 Views
- Last post by Hippie459MN
Jun 24, 2010 7:24 pm
-
- 1Replies
- 2223 Views
- Last post by transomstand
Sep 16, 2009 11:38 am
-
- 11Replies
- 5682 Views
- Last post by ccrick
Oct 28, 2009 10:59 pm
Who is online
Users browsing this forum: No registered users and 10 guests