After I removed my rotten transom, and ground the old wood off of the skin, I’ve noticed it is kind of wavy and not straight. Is this something that will go away after I put a few layers of glass over and kept it straight before I bed the transom in?
[ Post made via iPhone ]
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Transom exterior skin after transom removal
-
- Getting my feet wet
- Posts: 19
- Joined: Jan 21, 2018 11:42 am
- Location: Dothan, AL
- Has thanked: 2 times
- Been thanked: 3 times
- Contact:
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 72 times
- Contact:
Re: Transom exterior skin after transom removal
It should go back to being flat after putting the new transom in.
When you clamp it, a few things to consider.
Use as many clamps as you can. Always start at one end and clamp progressively to the other, and bottom first then the top. This way it helps move air pockets up and out.
Don't place the clamps directly on the transom, especially if you'll be using the Vise-grip style hand clamps. Use boards of 2x6s or 2x8s between the clamps and transom. This distributes the clamping pressure over a wider area, and prevents "dents" being created due to the pressure.
If you have a piece available, on the back outside part of the transom use a piece of plywood 1/2" or thicker between the clamps and transom. This will help flatten the skin as you'll essentially be sandwiching the exterior skin between it and the new transom.
[ Post made via Android ]
When you clamp it, a few things to consider.
Use as many clamps as you can. Always start at one end and clamp progressively to the other, and bottom first then the top. This way it helps move air pockets up and out.
Don't place the clamps directly on the transom, especially if you'll be using the Vise-grip style hand clamps. Use boards of 2x6s or 2x8s between the clamps and transom. This distributes the clamping pressure over a wider area, and prevents "dents" being created due to the pressure.
If you have a piece available, on the back outside part of the transom use a piece of plywood 1/2" or thicker between the clamps and transom. This will help flatten the skin as you'll essentially be sandwiching the exterior skin between it and the new transom.
[ Post made via Android ]
-
- Getting my feet wet
- Posts: 19
- Joined: Jan 21, 2018 11:42 am
- Location: Dothan, AL
- Has thanked: 2 times
- Been thanked: 3 times
- Contact:
Re: Transom exterior skin after transom removal
Awesome info. Thanks!!
[ Post made via iPhone ]
[ Post made via iPhone ]
1977 cocoloco varmint
1988 reaction 19
1988 reaction 19
-
- Random Topics
- Replies
- Views
- Last post
-
- 4Replies
- 4223 Views
- Last post by Hippie459MN
Dec 04, 2009 11:40 pm
-
- 9Replies
- 8707 Views
- Last post by ccrick
Dec 06, 2009 12:06 am
-
- 12Replies
- 11281 Views
- Last post by Andrew Vision
Oct 29, 2012 7:38 pm
-
- 9Replies
- 8009 Views
- Last post by wildfire78
Dec 27, 2009 10:44 am
-
- 1Replies
- 3830 Views
- Last post by charleskiller
Dec 08, 2009 7:38 am
Who is online
Users browsing this forum: No registered users and 4 guests