Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
88 Vision Restore
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: 88 Vision Restore
Still no pictures. Took the boat up to Gravenhurst for our second race of the year on Friday. Was very lucky to make a few passes in front of a very experienced crew, made some tweaks and got the magic prop from Hydromotive. Went back out and the boat was on rails, ran better than ever, I was extremely happy with the way it was coming out of the water, taking a set, and driving dead straight. Put it back on the trailer ready to race for the weekend, and noticed a cracked skeg Going to need a miracle to get it back in the water again this year, but at least I now know what prop it likes!
[ Post made via Android ]
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 73 times
Re: 88 Vision Restore
Heard the conditions were brutal up there. Windy and choppy. Some guys didn't even race due to it, and a Critchfield broke in half.
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: 88 Vision Restore
It was rougher than I've seen in that little Bay, but we still ran full course and schedule. I was able to get a loaner lower unit for my hometown race coming up, I will have my GoPro mounted and should have pics and vids to post. Going out Sunday for some pleasure boating, need some seat time lol.
[ Post made via Android ]
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: 88 Vision Restore
Did a little river and lake running yesterday, posted a short video on the Facebook page. I have a fuel system issue, but other than that the boat runs awesome. Engine height is dialled in and the boat actually settles down and is very driveable. I have the 2 hole CLE running 1 1/2" above the pad, 6" setback.
Turning a 24 mach 3 chopper, unknown rpm's (no gauges) at about 75 mph. None of the drama it had previously, it stays on the pad with very little steering input and just runs on rails. Now I need to find a bigger prop that doesn't upset the hull lol....
[ Post made via Android ]
Turning a 24 mach 3 chopper, unknown rpm's (no gauges) at about 75 mph. None of the drama it had previously, it stays on the pad with very little steering input and just runs on rails. Now I need to find a bigger prop that doesn't upset the hull lol....
[ Post made via Android ]
Last edited by idvette on Sep 04, 2019 6:06 am, edited 1 time in total.
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Site Admin
- Posts: 3991
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: 88 Vision Restore
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: 88 Vision Restore
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Site Admin
- Posts: 3991
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: 88 Vision Restore
Heck yeah! Looks awesome!
[ Post made via Android ]
[ Post made via Android ]
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: 88 Vision Restore
That's at the Baicour shop, couldn't have got it together without his help and shop space! Nice to have it back in the water
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: 88 Vision Restore
First race win of the year, and not only was it caught on camera, but also made it in the local paper! Kinda neat
[ Post made via Android ]
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Random Topics
- Replies
- Views
- Last post
-
- 7Replies
- 61022 Views
- Last post by Hippie459MN
Dec 05, 2021 12:14 pm
-
- 4Replies
- 42375 Views
- Last post by Hippie459MN
Nov 02, 2021 5:15 pm
-
- 5Replies
- 28500 Views
- Last post by Hippie459MN
Nov 02, 2021 5:18 pm
-
- 5Replies
- 114491 Views
- Last post by Hippie459MN
Mar 10, 2022 10:00 pm
-
- 3Replies
- 137900 Views
- Last post by Hippie459MN
Mar 10, 2022 10:03 pm