Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
‘89 HST rebuild ( Blown out bottom)
-
- Site Admin
- Posts: 3991
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
I just noticed some screws in your rigging hose at the adapters. That to keep the hose from coming off? I might need to do that on the motor side of my boat and never thought of doing that.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Kevin, those are 1/8” aluminum pop rivets.
The hose that came with the bezels was slightly larger than the barb section and wanted to come off.
I’ll dab some black paint on the rivet heads to make less noticeable.
[ Post made via iPhone ]
The hose that came with the bezels was slightly larger than the barb section and wanted to come off.
I’ll dab some black paint on the rivet heads to make less noticeable.
[ Post made via iPhone ]
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
The trailer was looking shabby so it got some paint.
[ Post made via iPhone ]
[ Post made via iPhone ]
- Attachments
-
- E532C048-3AB0-4679-B785-F5E11F6D2D6F.jpeg (317.68 KiB) Viewed 196171 times
-
- AC11D8EA-61BD-40B8-B175-3468B4BC1FA6.jpeg (295.87 KiB) Viewed 196171 times
-
- 378DADC2-A048-4265-B0F4-A62144F8A8A5.jpeg (431.4 KiB) Viewed 196171 times
-
- CFB2EEE6-F517-46A1-94B5-0C14A3D29A31.jpeg (641.63 KiB) Viewed 196171 times
-
- 7B18CCA1-4ADD-4996-BF3E-A6B14ABFB597.jpeg (605.88 KiB) Viewed 196171 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Figured some striping would look nice.
A friend gave me a roller striper. Thought I would give it a try compared to brushing.
This thing is amazing!!! Load the reservoir, set the guide and go to town. Nice clean lines. Took 30 minutes.
[ Post made via iPhone ]
A friend gave me a roller striper. Thought I would give it a try compared to brushing.
This thing is amazing!!! Load the reservoir, set the guide and go to town. Nice clean lines. Took 30 minutes.
[ Post made via iPhone ]
- Attachments
-
- 1CD7170E-CD1E-4548-8DED-579E009E4E81.jpeg (328 KiB) Viewed 196165 times
-
- AB0F55FB-B2B7-4590-845E-CC6D73EE4516.jpeg (278.88 KiB) Viewed 196165 times
-
- C8CCC2FA-5926-416D-920F-0C74B74B92BE.jpeg (314.22 KiB) Viewed 196165 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
I put together an interior ( in the interior section), https://www.hydrostreamforums.com/viewtopic.php?f=48&t=4448&p=26332#p26332
This project is done….
[ Post made via iPhone ]
This project is done….
[ Post made via iPhone ]
- Attachments
-
- AF2C2A45-B688-434A-B164-524A0069A0ED.jpeg (338.44 KiB) Viewed 196050 times
-
- 2ED3FC54-7092-4FA9-BD3D-47C2BC06DB5E.jpeg (282.52 KiB) Viewed 196050 times
-
- 5C9DEAEE-3D41-4986-B386-8F833A373D5B.jpeg (392 KiB) Viewed 196050 times
Last edited by alaskastreamin on Mar 08, 2023 8:46 am, edited 2 times in total.
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Getting my feet wet
- Posts: 63
- Joined: May 16, 2010 4:24 pm
- Location: eastern washington
- Been thanked: 5 times
-
- Site Admin
- Posts: 3991
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Looks great Ron!!!! Cant wait to see some pictures of it in the water.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- The new guy
- Posts: 3
- Joined: Jul 10, 2017 8:55 am
- Location: Auburn Alabama
- Been thanked: 1 time
Re: ‘89 HST rebuild ( Blown out bottom)
Hi Ron,
I'm late coming in on this build. Obviously you are an absolute master at restoring Hydrostream boats!!! The HST looks absolutely fabulous!!!! Your hard work and dedication to this complicated project will certainly be recognized when you take it out on the water! Thanks for sharing your knowledge and journey on this boat with us!!!!
Mike B.
I'm late coming in on this build. Obviously you are an absolute master at restoring Hydrostream boats!!! The HST looks absolutely fabulous!!!! Your hard work and dedication to this complicated project will certainly be recognized when you take it out on the water! Thanks for sharing your knowledge and journey on this boat with us!!!!
Mike B.
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Thanks for the kind words!!
I hope by documenting these projects, may help folks down the line see how it’s done.
Ron
[ Post made via iPhone ]
I hope by documenting these projects, may help folks down the line see how it’s done.
Ron
[ Post made via iPhone ]
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 7178 Views
- Last post by YDOC462
Apr 23, 2013 12:32 pm
-
- 3Replies
- 14096 Views
- Last post by motorcityviper
May 27, 2020 2:53 pm
-
- 4Replies
- 5580 Views
- Last post by YDOC462
Apr 28, 2013 5:35 pm
-
- 1Replies
- 7242 Views
- Last post by steve3340
Apr 30, 2013 7:23 pm