Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

88 vision

Chat about anything boating or non boating here. Try to keep it clean.
Post Reply
User avatar

Topic Author
Mark_1
The new guy
The new guy
Posts: 5
Joined: Jun 18, 2023 6:07 pm
Location: Kingston Ontario
Has thanked: 1 time

88 vision

Post: # 26372Post Mark_1 »

Hello everyone, I recently purchased an 88 vision. I'm having issues with the boat proposing, it has a 150 merc on it which seems to sized right and not over kill. Once I hit over 45 km an hour it starts bouncing. I got it up to 81 km but it's bucking pretty hard on flat water. It has a 26 pitch chopper prop and a full tank and trimmed right down.

[ Post made via Android ] Image
Attachments
IMG_20230603_172135_01.jpg
IMG_20230603_172135_01.jpg (298.96 KiB) Viewed 10198 times
IMG_20230618_184300.jpg
IMG_20230618_184300.jpg (421 KiB) Viewed 10198 times
IMG_20230618_184252.jpg
IMG_20230618_184252.jpg (364.79 KiB) Viewed 10198 times
User avatar

Hippie459MN
Site Admin
Site Admin
Posts: 3983
Joined: Mar 25, 2009 7:31 pm
Location: Nowthen, MN
Has thanked: 356 times
Been thanked: 83 times
Contact:

Re: 88 vision

Post: # 26375Post Hippie459MN »

Welcome! Sweet looking boat. I personally don't have any experience with a Vision but a few guy here do. Hopefully they will chime in.

[ Post made via Android ] Image
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet

1977 HydroStream Vulture - Worlds longest ongoing project. :eek:
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
User avatar

Surface Scratcher
Hydrostream Addict
Hydrostream Addict
Posts: 344
Joined: Apr 11, 2009 11:17 pm
Location: Central Texas
Has thanked: 1 time

Re: 88 vision

Post: # 26381Post Surface Scratcher »

I also have no experiences with the Vision so these comments are general. Boats often porpoise because there too much weight in the rear. This means that your center of gravity is too far back. Your engine is heavier than the boat was designed for, and the set back compounds the issue. With that power and that prop, your rig should obtain 112 km easily.

What I would try:
Prop-shaft 1 to 2 inches below pad.
23 or 24 inch 'ski' prop (this will carry you faster than your are going now). Go back to the chopper after issues are fixed.
Three- 20 lb. sand bags in front of feet. (Sand bags because they are easily moved.)
Make sure the boat is well balanced side to side also.

Best of luck! The fun is in the testing!
Post Reply

  • Random Topics
    Replies
    Views
    Last post