Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

89' Vegas V / 91' Yamaha ProV 200... Top speed set up, school me please

Have questions about setting up your boat? Engine height, setback, prop, etc.
Post Reply
User avatar

Topic Author
The new guy
The new guy
Posts: 1
Joined: Nov 23, 2023 11:23 pm
Location: North Battleford, SK

89' Vegas V / 91' Yamaha ProV 200... Top speed set up, school me please

Post: # 26411Post HydroVegas701 »

Hey guys, new to the forum & need schooling!

I just bought my first power boat, a beautiful 89' Vegas V with a 91' yamaha ProV 200. It was a blast this summer, but like everything else I want more top end lol. After talking to more knowledgeable boat guys and reading up on the forums I'm slowly learning, but still very fresh in the outboard game.

So right now I have a 6" hydraulic jack plate with a 27p Comp Fury prop, do have a water pressure gauge. After playing with trim all summer and practicing I could only ever get 74mph out of it & I hear of guys talking about 85-95 mph... So obviously my set up ain't working!

Now I can't remember what my RPM's were at WOT with the fury, it is a stock ProV 200. What is the optimal top end pitch this motor can handle, will it do a 29 or stick to 27?

What is the spline size on the factory leg, so I know what props will attach?

Also excuse my lack of knowledge, but can I run a lightning ET or Mazco R.E.? Cause i'm pretty sure the ProV is prop through exhaust and to me I don't see holes in those props such as the Bravo 1 OC.

Set back length?

Low water pick up for the ProV?

Barrel length for this type of boat?

User avatar

Surface Scratcher
Hydrostream Addict
Hydrostream Addict
Posts: 344
Joined: Apr 11, 2009 11:17 pm
Location: Central Texas
Has thanked: 1 time

Re: 89' Vegas V / 91' Yamaha ProV 200... Top speed set up, school me please

Post: # 26412Post Surface Scratcher »

Congratulations, first power boat and its a Stream. I can't answer all your questions, but I'll share some typical beliefs about your hull and set up.

The Vegas V hull is used with the Vulture and others, and they are known to like a lot of setback.

To go faster, you'll want to use a surfacing prop, like the RE. A jacked up, over the hub, surfacing prop will be more efficient at high speeds.

So, yes, you'll need a low water pickup, a surfacing prop, maybe more setback. Also, steering will need to be in top condition after these mods.

Be safe. :boating:
Post Reply

  • Random Topics
    Last post