What I did....sanded down the top, covered the top with a piece of sticky shelf liner (flat *** possible), drew out the image, with an exacto knife cut out the darkest tone, using the darkest stain put a couple of coats on, (be careful not to soak wood spruce usually the top is a super soft wood and if u soak it it will bleed) , then cut next tone out repeating process going from darkest to lightest tones until finished.
I found afterwards they make wood stain pens ( a lot like a paint pen) that u can get at arts and crafts store
[ Post made via Mobile Device ] ![Image](http://www.hydrostreamforums.com/images/mobile.png)