Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
‘89 HST rebuild ( Blown out bottom)
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
‘89 HST rebuild ( Blown out bottom)
I picked up this 6/89 HST this summer for the value of the trailer. It was 3-1/2 hrs away so we ran over and picked it up.
It had hit a wake boat wake and the bottom blew out leaving a massive hole.
The owner was able to get to the beach before it sank.
The hull flexed hard enough to pop the plywood floor loose from the top of the tunnels.
Here’s some pictures to get you all up to speed.
[ Post made via iPhone ]
It had hit a wake boat wake and the bottom blew out leaving a massive hole.
The owner was able to get to the beach before it sank.
The hull flexed hard enough to pop the plywood floor loose from the top of the tunnels.
Here’s some pictures to get you all up to speed.
[ Post made via iPhone ]
- Attachments
-
- 50E96A9F-9A9E-41AB-B628-CACF1045FCB8.jpeg (60.5 KiB) Viewed 57648 times
-
- 704B506C-3E5A-40A0-A08D-A1EF669AF7A1.jpeg (63.75 KiB) Viewed 57648 times
-
- D69DC6E8-0FC0-45A5-BC0F-E18C5F33F2EC.jpeg (64.43 KiB) Viewed 57648 times
-
- 049ABCD7-F8B8-4100-AD60-54FE6F22ADC9.jpeg (70.77 KiB) Viewed 57648 times
-
- C5875B98-E771-4322-AD1E-8368755110F1.jpeg (63.04 KiB) Viewed 57648 times
-
- F8F5F37C-5785-4A5E-99B6-25EF67C76036.jpeg (99.35 KiB) Viewed 57648 times
-
- B37C740D-8FE0-4B7D-A120-B0F66448B0E0.jpeg (76.69 KiB) Viewed 57648 times
-
- E6BD73E0-527F-4315-B3E3-CA86045A6741.jpeg (61.27 KiB) Viewed 57648 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Today I got her inside , off the trailer and up on its side.
Looking thru the hole I could see what happened.
The center stringer was never attached to the forward bulkhead. It ended about 18” away…..That’s where the hull collapsed and imploded.
The floor is separated from the tunnel top and there’s a 2-1/2” gap at the toe board bulkhead.
The bulkhead at the rear of the floor is tore loose as well. It appears the “mid” 89 models got a better layup was just after this 6/89 one.
So far the balsa that is visible is golden. Even at the edge of the hole it’s golden.
Tomorrow I’ll pull the deck and make a jig to set the hull on for the repairs.
[ Post made via iPhone ]
Looking thru the hole I could see what happened.
The center stringer was never attached to the forward bulkhead. It ended about 18” away…..That’s where the hull collapsed and imploded.
The floor is separated from the tunnel top and there’s a 2-1/2” gap at the toe board bulkhead.
The bulkhead at the rear of the floor is tore loose as well. It appears the “mid” 89 models got a better layup was just after this 6/89 one.
So far the balsa that is visible is golden. Even at the edge of the hole it’s golden.
Tomorrow I’ll pull the deck and make a jig to set the hull on for the repairs.
[ Post made via iPhone ]
- Attachments
-
- 5AF887F5-365E-4748-A60C-C54CBBB590C8.jpeg (379.71 KiB) Viewed 57647 times
-
- F0379DCE-2DF6-45EB-83F5-BFB6180F860E.jpeg (410.05 KiB) Viewed 57647 times
-
- 55E052C2-F5C7-4DF0-B03A-263B90132185.jpeg (417.41 KiB) Viewed 57647 times
-
- B2FBDE49-020C-4E0B-B031-CD7794E662E5.jpeg (290.4 KiB) Viewed 57647 times
-
- B562A790-84D8-4D22-8BA2-6D074AE7FCAE.jpeg (431.87 KiB) Viewed 57647 times
-
- 38B02A66-5BCC-4F00-83F5-880C96A8C929.jpeg (449.19 KiB) Viewed 57647 times
-
- 775A4557-22EB-4BAF-AE9D-6E9502A0C1A7.jpeg (386.31 KiB) Viewed 57647 times
-
- D7245D97-E397-449F-8F8F-E948E5B9BBC5.jpeg (351.8 KiB) Viewed 57647 times
-
- 3F51038B-C321-47DC-88EA-9EE1B0CAD3D4.jpeg (369.45 KiB) Viewed 57647 times
-
- 47BC57F8-3384-46E1-8CEE-B84858F3B4FA.jpeg (390.56 KiB) Viewed 57647 times
-
- 49D33BBE-A8ED-4A3A-9E27-9B649A4B0F1A.jpeg (340.68 KiB) Viewed 57647 times
Last edited by alaskastreamin on Jan 21, 2023 4:05 pm, edited 1 time in total.
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Day 2
Sawzall the opening until I get to non-fractured fiberglass. Start cutting out the form boards .
I assumed the side walls from the tunnels were 90*. Wrong-O!! Outer sponson wall is 93* and the center sponsen is 97* .
All the panels need to fit snug to get a nice tight repair.
I had to router a 1/2” radius on the sides so they would fit properly.
[ Post made via iPhone ]
Sawzall the opening until I get to non-fractured fiberglass. Start cutting out the form boards .
I assumed the side walls from the tunnels were 90*. Wrong-O!! Outer sponson wall is 93* and the center sponsen is 97* .
All the panels need to fit snug to get a nice tight repair.
I had to router a 1/2” radius on the sides so they would fit properly.
[ Post made via iPhone ]
- Attachments
-
- D17CAE6C-D1E7-49C8-AF37-F639CD9D524F.jpeg (264.91 KiB) Viewed 57535 times
-
- C3C40AA0-DB3B-4BE3-ACA3-8F5F05DD707A.jpeg (414.53 KiB) Viewed 57535 times
-
- 386B0DB2-89BE-486B-A52C-187A892EF340.jpeg (308.42 KiB) Viewed 57535 times
-
- E6745168-35E7-472D-AB91-C70C264D0133.jpeg (363.27 KiB) Viewed 57535 times
-
- 6DF86F41-39A5-4841-92E4-74A9AB144725.jpeg (330.27 KiB) Viewed 57535 times
-
- 65DFEB14-E9CC-4D42-951C-7281CCD8863C.jpeg (366.42 KiB) Viewed 57535 times
-
- DD11230C-A26C-4E2F-9023-3B21754C5DBD.jpeg (378.07 KiB) Viewed 57535 times
-
- 665C7E26-C572-4E72-8F61-62A98C3AF91E.jpeg (348.1 KiB) Viewed 57535 times
-
- 323BA7BC-F380-4A11-A36A-0614FFB841BE.jpeg (284.99 KiB) Viewed 57535 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Day 3
Today I attached the side rails to the tunnel form and another strip outbound of those. That’s as far as I can go with the forms until I remove the bulkheads and floor .
The transom and knee braces were removed and the deck popped right off.
Once the side rails were removed along the sides of the floor, the floor plywood lifted right out. It had totally popped loose from the tunnel tops.
[ Post made via iPhone ]
Today I attached the side rails to the tunnel form and another strip outbound of those. That’s as far as I can go with the forms until I remove the bulkheads and floor .
The transom and knee braces were removed and the deck popped right off.
Once the side rails were removed along the sides of the floor, the floor plywood lifted right out. It had totally popped loose from the tunnel tops.
[ Post made via iPhone ]
- Attachments
-
- C036D30E-F760-4315-80B4-C06575F7F1CD.jpeg (421.84 KiB) Viewed 57510 times
-
- 42E97283-C79C-4A5E-84AC-A604449ADD84.jpeg (388.46 KiB) Viewed 57510 times
-
- ABEDE3EF-B605-41F0-85A1-39E33B8191E6.jpeg (390.63 KiB) Viewed 57510 times
-
- BF555D1A-B86D-4201-A242-5913F1CE6A7E.jpeg (457.82 KiB) Viewed 57510 times
-
- 4A45640E-400A-42B0-82F9-DC377899DB17.jpeg (409.5 KiB) Viewed 57510 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
Re: ‘89 HST rebuild ( Blown out bottom)
Hats off to ya, Ron! Thats quite the project.
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Day 4
Technically it’s day 5 but I took yesterday off to run errands, order the fiberglass stuff ($500) and 6 colors of gelcoat (another $500).
So day 4 working on it.
Got 10” snow last night so not a huge production day.
Scraped off the last couple layers of the floor plywood from the tunnel tops. You can see the areas the floor was actually attached. Where it wasn’t, there’s super dry chopper gun fibers. They don’t even look like they were compressed. Probably an in-experienced operator not laying it down even.
Removed most of the foam that was poured at the joint. Checked the sponsons foam and all dry.
The upper deck had a couple fractures so I flipped the deck and sawed thru the tears to get everything to lay flat again.
It looks like the hull and deck were built with 2 layers 1-1/2 oz. chop mat and a 1708 stitch mat . That’s what I ordered to make the repairs.
Most of the deck is covered with stress cracks. The gelcoat will be removed and I’ll look closely for fractures in the chop mat. On the underside, the 1708 has no fracturing so that’s a good thing.
[ Post made via iPhone ]
Technically it’s day 5 but I took yesterday off to run errands, order the fiberglass stuff ($500) and 6 colors of gelcoat (another $500).
So day 4 working on it.
Got 10” snow last night so not a huge production day.
Scraped off the last couple layers of the floor plywood from the tunnel tops. You can see the areas the floor was actually attached. Where it wasn’t, there’s super dry chopper gun fibers. They don’t even look like they were compressed. Probably an in-experienced operator not laying it down even.
Removed most of the foam that was poured at the joint. Checked the sponsons foam and all dry.
The upper deck had a couple fractures so I flipped the deck and sawed thru the tears to get everything to lay flat again.
It looks like the hull and deck were built with 2 layers 1-1/2 oz. chop mat and a 1708 stitch mat . That’s what I ordered to make the repairs.
Most of the deck is covered with stress cracks. The gelcoat will be removed and I’ll look closely for fractures in the chop mat. On the underside, the 1708 has no fracturing so that’s a good thing.
[ Post made via iPhone ]
- Attachments
-
- 253681D8-E930-4899-9077-B3E9C40B4129.jpeg (576.83 KiB) Viewed 57483 times
-
- 9C978BCD-4584-4379-877E-074C58F9E05C.jpeg (534.52 KiB) Viewed 57483 times
-
- 121861E6-04B6-4989-9AC5-5E20B5A6E9C9.jpeg (457.66 KiB) Viewed 57483 times
-
- 98421715-5B57-4183-B2AB-5C9289A7042F.jpeg (453.19 KiB) Viewed 57483 times
-
- A1239298-5A23-4D15-91BA-64F713CCE1A6.jpeg (225.04 KiB) Viewed 57483 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Site Admin
- Posts: 3988
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 356 times
- Been thanked: 83 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
WOW! That had be one heck of a hit! Glad they got back ok.
Can't wait to see this come along. As with everything you do, this should come out amazing!
Can't wait to see this come along. As with everything you do, this should come out amazing!
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Thanks guys!!
This one is really messed up. I’ll get it though.
Got all the grinding done, floor, bulkheads, knee braces cut and fit. Got the tunnel forms set on the jig platform, plumb, square and level.
[ Post made via iPhone ]
This one is really messed up. I’ll get it though.
Got all the grinding done, floor, bulkheads, knee braces cut and fit. Got the tunnel forms set on the jig platform, plumb, square and level.
[ Post made via iPhone ]
- Attachments
-
- BA44A078-1F98-443F-971F-BFBC45C63833.jpeg (138.33 KiB) Viewed 57400 times
-
- 731837D7-DD69-4A17-ADBA-F146EB5B09F6.jpeg (146.84 KiB) Viewed 57400 times
-
- 06B1F522-9531-4907-878E-AE7D9C114D66.jpeg (118.61 KiB) Viewed 57400 times
-
- 6F0F01CF-506B-41C5-8A13-811F0EF37281.jpeg (125.32 KiB) Viewed 57400 times
-
- CB8D4E2B-8162-49DF-A5C4-155502D939CE.jpeg (145.29 KiB) Viewed 57400 times
-
- 52C54535-A7E6-4CF6-B7AB-3385CA25031F.jpeg (129.34 KiB) Viewed 57400 times
-
- 11B8033E-CA10-413C-8246-3A3B420EE86F.jpeg (173.74 KiB) Viewed 57400 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Today I ran some string lines to make sure everything is true. I added an extra brace for the front end of the jig to get rid of some minor flexing in the aluminum stiffeners.
Got the rest of the mold put in place and made some radiuses with Sheetrock hot mud.
Two coats of Johnson paste floor wax was applied to the mold finished off my day.
The fiberglass materials won’t be here for a few days so I’m on hold for now.
[ Post made via iPhone ]
Got the rest of the mold put in place and made some radiuses with Sheetrock hot mud.
Two coats of Johnson paste floor wax was applied to the mold finished off my day.
The fiberglass materials won’t be here for a few days so I’m on hold for now.
[ Post made via iPhone ]
- Attachments
-
- 21A9E220-FBF8-4B76-9909-8A4BA3674901.jpeg (99.2 KiB) Viewed 57380 times
-
- A6CA7D43-D195-470A-B545-B15C72A35435.jpeg (102.22 KiB) Viewed 57380 times
-
- C80318E8-4860-4819-9591-2B9C2A32B0E8.jpeg (143.15 KiB) Viewed 57380 times
-
- 4685B554-68CC-4AF0-A187-D4B76A61149E.jpeg (141.46 KiB) Viewed 57380 times
-
- 5960814E-48F6-49F2-A9F7-F1C7DC91BF66.jpeg (112.19 KiB) Viewed 57380 times
-
- BA839BF7-86DE-445D-B1FD-3014196A8D2F.jpeg (143.55 KiB) Viewed 57380 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Forgot to add the string lines.
[ Post made via iPhone ]
[ Post made via iPhone ]
- Attachments
-
- 4F06BB6E-6B04-440E-A37A-E0442B0B1058.jpeg (253.94 KiB) Viewed 57380 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Random Topics
- Replies
- Views
- Last post
-
- 1Replies
- 5798 Views
- Last post by Taber13
Aug 14, 2015 9:52 am
-
- 18Replies
- 31701 Views
- Last post by Wgp
Mar 31, 2021 10:06 pm
-
- 7Replies
- 8188 Views
- Last post by terry2
Oct 03, 2015 10:06 pm
-
- 4Replies
- 4735 Views
- Last post by JerzyDave
Jul 14, 2016 10:59 pm
-
- 18Replies
- 14764 Views
- Last post by mitchielpricer
Jan 17, 2016 4:03 pm